Stationary sand blasting chamber production company SAPI GmbH

The direct purpose of stationary sand blasting chamber is the processing of almost all sizes and types of parts. And as a plus.

stationary sand blasting chamber is re-operation of the fraction. Preparation of the fractions is carried out using a high-efficiency air purifier with 4-stage cleaning process that enables the reuse consumable material (e.g., granules of solid cast iron up to 300 times). In addition, when working with metal, waste containing 60 – 70 % of iron can be scrapped. Lifts work on the principle of Elevator using very little power and do not require additional Foundation when installing. Soft lighting with SAPI lamps with increased lamp life, creates optimum illumination when working. Light yellow protective rubber coating not only prevents shot rebounding, but also increases light reflection and creates a pleasant working atmosphere. Install the SAPI is built on a modular principle, which allows for quick connection of additional modules or replace them. Flat conveyor system SAPI operates smoothly with minimum expenditure of energy. Thanks to the low height (130 mm) possible installation on already existing concrete floor. The shot is moved by a flat scraper mechanism to scoop lifter which by means of bucket belt system delivers it to the electromagnetic drum filter. There it is cleaned from the remnants of the processed material, impurities, toxins and unusable fractions. If you use ferritic and mineral shots, they are split. After which she served for re-use in a container for storage of the fraction, and in the case of different varieties in separate containers. After blasting we recommend to protect the metal from corrosion are electric galvanized surface, which can be produced directly in the blasting hall.

Scope

The stationary blasting halls are used for the processing of large products such as turbines, pylons, girders, trams, subway cars, locomotives, etc.

Our contact information:

AUTEV Project GmbH

Am Waisenhausplatz 26
Pforzheim, 75172
Tel: +49 30 50 91 27 72

Mob. tel: +49 17 91 11 08 78
e-mail: contact@autev-project.de

OOO "AUTEV Project Ukraine"

Pushkin str., 96A, of.2

61024, Ukraine, Kharkov,

e-mail: contact@autev-project.com.ua

tel.: +38(057) 704-23-80, +38(057) 704-38-25

Fax: +38(057) 704-38-24

www.autev-project.com.ua