Bucket Elevator belt BKNL-65

Conveyor tape is designed for transportation of loose, lumpy and piece cargoes on tape conveyors with a variety of carrying rollers. The upper and lower surface of the conveyor belt can have a rubber layer that is called surface. Lining can be both one and the other sides (working and non-working) and have a different thickness.

For the connection of the tape using cold vulcanization (adhesive), hot vulcanising and mechanical connectors.Among the rubber bands should be singled out Chevron, which are intended mainly for transporting goods at an angle.

The purpose of the conveyor belt are divided into the following main types:
1) Mine is designed to work in the mines or terms equivalent to mine. The main feature of such tapes is the reduced Flammability (self-extinguishing).
2) Hardy – for operation at low temperatures (down to -60 °C).
3) Heat resistant high heat resistance – designed for the transport of hot goods and for work at temperatures to +200 °C.
4) Food – used in industries where the conveyer belt on the technological process comes in direct contact with food. The main property of such tapes – do not enter and do not cause chemical reactions when direct contact with the transported material (food).
5) Oil-resistant – designed for conveyors in which the tape runs in contact with various types of oils or fuels. The main feature of such tapes is chemically resistant to these substances.
6) General purpose – this tape is designed for operation on conveyors as the average loading on strength characteristics and on the temperature. This is the most common type of conveyor belts.

On the bucket Elevator belt can be mounted in a polymer, and metal buckets.
Driving belt of the Elevator has the following standard widths: 125mm, 150mm, 175mm, 200mm, 300mm, 400mm, 450mm, 500mm, 600mm, 650mm.