The boiler long burning SWaG 25 U (solid)

SWaG is a leading manufacturer of solid fuel boilers long burning.

Specifications 25 SWaG U:

Nominal the boiler output kW 25

Estimated heated area (with a ceiling height of 3M and standard wall insulation) m2 250

Fuel: primary - bituminous coal, anthracite

alternative -wood, briquettes, pellets

Area heat exchanger of boiler m2 3,1

Ratio useful effect, not less than % 89

One-time loading fuel kg 180

Duration combustion of a single fuel loading main 72-144 hours

alternative 12-36

The size of the furnace diameter Ø [mm] 660

height mm 800

the volume 0,27 m3

Water capacity the boiler l 49

The weight of the boiler with components packaging kg 410

The required thrust the flue gases PA 20-30

Temperature the flue gases at the boiler outlet 110-150 0C

Recommended the minimum water temperature 0C 45

Maximum water temperature 0C 90

Nominal (working) water pressure in the boiler MPa 0,10

Test water pressure not more than 0.20 MPa

The power consumption not more than 95 W

Dimensions doors mm 300х350

The size of the door to remove the ash mm 200х350

External dimensions hog Ø 180 mm

Diameters pipes of the inlet/outlet of water network (DN) mm 50 (2')

Minimum the parameters of the chimney:

the cross-sectional area 200 cm2

internal diameter Ø 180 mm

height m 6

The package boiler includes:

1. Supercharger air (turbine) Ord

2. The electronic unit management)

3. Mechanical thermometer

4. Dispenser air (burner) cast iron

5. Device for care of the boiler

6. Relief valve excess pressure

7. Manual installation, operation and warranty card

8. Grate cast iron

9. Pipe flow air in the grate of the boiler

DP "Sofiivka-Zhitomir" is the official representative of the company "SWaG" in the Zhytomyr region.

NASHI specialistyou will provide You with expert advice regarding the purchase and installation of solid fuel boilers .