Boiler heating SWaG 40 U (solid)

 Unique performance solid fuel boilers SWaG are the result of years the work of the engineers of the company "SWaG" for improving the design, aimed at optimization of the combustion processes in the combustion chamber. In solid fuel boilers SWaG uses the principle of top combustion. Due this solid fuel boiler SWaG has a burn duration in one tab of firewood up to 1.5 days

Specifications 40 SWaG U:

Nominal boiler output kW 40

Estimated heated area (with a ceiling height of 3M and standard wall insulation) m2 400

Fuel: primary - bituminous coal, anthracite

alternative-firewood, briquettes, pellets

The area of the boiler heat-exchanger m2 4,2

Coefficient of performance, at least % 89

Single load of fuel kg 220

The duration of combustion of a single fuel loading main 72-144 hours

alternative 16-36

The size of the furnace diameter Ø [mm] 660

height mm 1200

the volume of 0.41 m3

Water boiler capacity l 63

The weight of the boiler with accessories in packaging kg 540

The required thrust of the flue gases PA 20-30

The temperature of the flue gases at the boiler outlet 110-150 0C

Recommended minimum water temperature 0C 45

Maximum water temperature 90 0C

Nominal (working) pressure of water in the boiler MPa 0,10

Test the water pressure, not more than 0.20 MPa

The power consumption is not more than 95 W

The size of loading door mm 300х350

The size of the door to remove the ash mm 200х350

The external dimensions of the flue Ø mm 180

The diameters of the branch pipes of the inlet/outlet of water network (DN) mm 50 (2')

The minimum parameters of the chimney:

the cross-sectional area 200 cm2

inner diameter Ø 180 mm

height m 7

DP "Sofiivka-Zhitomir" is the official representative of the company "SWaG" in the Zhytomyr region.

NASHI specialistyou will provide You with expert advice regarding the purchase and installation of solid fuel boilers .