The machine planer-thicknesser ADM 320
Price: | 1 990 EUR |
Company: | Tehnologicheskoe BYuRO |
Seller: | Grekov Roman |
Phones: | +380 44 490 555 0 Show phone |
Address: | Ukraine, Kyiv |
CTanok surface ramusovic ADM 320
Designed for machining from solid and composite wood, the creation of the base surfaces and processing in the thickness dimension (the so-called flat milling on a given thickness dimension).
· High quality and precision machining blanks.
· The minimum time for the transition from planing works to rassasavanii and Vice versa.
· Cast iron work tables with brushed surface.
· The tables node planer with fine adjustment.
· The thicknessing table node with Central drive the column and supports.
· Activation and deactivation of a surface gauge is carried out without stopping the machine.
· Microtubuli, turn off the machine the opening of the outbound table in the planing mode.
· Lock starting the machine when uncovered tables or struzhkolomatelja in the modes of planing and thicknessing respectively.
· Stroikombinata, provided with a pipe for connection to the dust. Closes the knife shaft in the planar mode milling (thicknessing) and prevents access to the knife shaft from the bottom (under tables) in the mode of planing. Stroikombinata can be locked in two provisions: for the operation of the planing and thicknessing mode.
· The partitions between the knife shaft and the feed and pulling rollers, preventing touch with them, and also closing access to the knife shaft under the jointer tables.
· The ability to configure desktops for height and lock them in adjusted position.
· Limiter outbound table not allowing him to fall below the highest point of the knife roller.
· Slotted strap at the ends of the planer tables, located near the cutter shaft. Reduce noise and remain always at a distance of from 1 to 5 mm to the circumference cutting, regardless of the position planer table height.
· Multi-grab protection, protecting reverse blow details in thicknessing mode. Located on the front side thicknesser node, before the feed roller, covers the entire working the width of the thicknesser node. Consists of separate grabs a width of 15 mm mounted on shaft.
· Electronic brake for electrodynamic stop engine.
· Protection against voltage drops below the permissible limits.
· Emergency stop on main panel.
· Protective neutral earthing.
· Motor protection from overload on the basis built-in thermal contacts.
· Degree of protection IP54 the electrical system.
· The CE standard.
Specifications
The ADM 320
Jointer
Maximum working width
mm
320
The length of the table
mm
1500
The size of the line
mm
1100х155
The slope of the line
( 0 )
900 450
Maximum remove thickness
mm
5
Diameter of knife shaft
mm
80
The number of knives
PCs
3
Blade dimensions
mm
320x30x3
The rotation of the main shaft
min-1
5600
The surface gauge
Maximum operating width
mm
316
The length of the table
mm
600
Maximum remove thickness
mm
3
The maximum height details
mm
230
Minimum height details
mm
4
The feed rate
m/min
7
General technical data
Power motor
kW
2,2
The number engines
PCs
1
Working height
mm
850
Diameter bits of aspiration
mm
100
Length
mm
1500
Width
mm
520
Height
mm
1000
Weight
kg
315