The machine planer-thicknesser FS 41
Price: | 3 260 EUR |
Company: | Tehnologicheskoe BYuRO |
Seller: | Grekov Roman |
Phones: | +380 44 490 555 0 Show phone |
Address: | Ukraine, Kyiv |
CTanok surface ramusovic FS 41
Designed for machining from solid and composite wood, the creation of the base surfaces and processing in the thickness dimension (the so-called flat milling on a given thickness dimension).
· Exceptional stability and precision, when the processing of small workpieces, confirmed by the Ukrainian industries.
· The minimum time for the transition from planing works to rassasavanii and Vice versa.
· Cast iron work tables with brushed surface.
· The tables node planer with fine adjustment.
· Convenient and accurate aluminum ruler with the ability to tilt from 90° to 45°.
· The thicknessing table node with Central drive the column and supports.
· The thicknesser table with adjustable knot rollers (model FS 41 N).
· Activation and deactivation of a surface gauge is carried out without stopping the machine.
· Microtubuli, turn off the machine the opening of the outbound table in the planing mode.
· Microtubuli, turn off the machine the opening of struzhkolomatelja in thicknessing mode.
· Lock starting the machine when uncovered tables or struzhkolomatelja in the modes of planing and thicknessing respectively.
· Closes the knife shaft in the planar mode milling (thicknessing) and prevents access to the knife shaft from the bottom (under tables) in the mode of planing.
· Multi-grab protection, protecting reverse blow details in thicknessing mode. Located on the front side thicknesser node, before the feed roller, covers the entire working the width of the thicknesser node. Consists of separate grabs a width of 15 mm mounted on shaft.
· Dynamically balanced chetyrehrazovoe shaft.
· Electronic brake for electrodynamic stop engine.
· Protection against voltage drops below the permissible limits.
· Emergency stop on main panel.
· Protective neutral earthing.
· Motor protection from overload on the basis built-in thermal contacts.
· Degree of protection IP54 the electrical system.
· CE standard
Specifications
FS 41 N
Jointer
Maximum working width
mm
410
The length of the table
mm
1800
The size of the line
mm
1100х155
The slope of the line
( 0 )
900 450
Maximum removable thickness
mm
5
Diameter of knife shaft
mm
100
The number of knives
PCs
4
Blade dimensions
mm
410х32х4
The rotation of the main shaft
min-1
4500
The surface gauge
Maximum working width
mm
406
The length of the table
mm
700
Maximum removable thickness
mm
4
The maximum height of the part
mm
225
Minimum height details
mm
4
The feed rate
m/min
8
General technical data
Electric motor power
kW
3,0
The number of engines
PCs
1
Working height
mm
850
The diameter of the tips of aspiration
mm
120
Length
mm
1800
Width
mm
740
Height
mm
1000
Weight
kg
420