Thermometer-contact digital thermostat TKC -250

 Thermometer - contact digital temperature controller (hereinafter TCC) is designed for measuring and temperature control with high degree of accuracy, with the results of the control signals to the actuators (closing or opening relay contacts) on the temperature threshold, which is set the master device over the entire range of measurement.

   Measurement and regulation of temperature is in the range from 0 to 250ºС or any other on request of the customer.

  Distance between the measurement point and the location of the secondary device on the shield can be any at the request of the customer in the range of 0.5 to 10 m (Length the price is not affected)

  TCC used for hot water and steam boilers, furnaces for various purposes, in chemical and other processes requiring the measurement and control of temperature, different types of industry, as well as to maintain a predetermined temperature in room.

 OPERATING CONDITIONS

 Conditions operation thermometer:

- ambient temperature from 5 to 45 ° C;
- relative humidity: up to 95% at temperature 25 ° C;
- atmospheric pressure from 84,0 to 106,7 kPa (630 to 800 mm Hg.St.);
- voltage AC power from 195 to 242 V.

 The mode of operation of the device TCC — continuous.

                                                  TECHNICAL DATA

   The thermometer provides temperature measurement and actuation of the actuating relay when the measured temperature the limit set by the setpoint ± 1% of set value

  As temperature sensor is used:

 Semiconductor IP (TCC-120)

 Three series-connected diode 1 N 4148 (TCC-250)

     Thermocouple THA-2088 (TCC-900).

 Measuring range temperature - 0-120ºC (TCC-120), 0-+250 oC (TCC-250 ) or any the other limit is from minus 60 º C to + 900ºС

  Maximum measurement error – 1 % from the top limit of measurement

   The temperature setpoint in the entire measuring range

    Power consumption (no more W) - 3.0

    Overall dimensions of the unit (not more mm:) - 90х65х35;

    Weight (kg) - 0,2

    Performance instrument panel-

   Installation - standard DIN rail 35 mm

 The parameters of switched electrical circuits:

- AC voltage - up to 250;

- power current up to 5 A.