The anti-interference network filter FP-3, FP-5, FP-11, FSP-70
Offer type: salePublished: 25.09.2017
| Price: | negotiated |
| Company: | ChP |
| Seller: |  Ivanov Anatolij |
| Phones: |  Write a message |
| Address: | Ukraine, Chernihivs'ka Oblast', Chernihiv |
The filter network noise OP-3pcs 3M.
Filter the network anti-interference high frequency OP-7pcs 5.
The filter network noise OP-20pcs 11.
Anti-interference filter FSP-70 1pc.
Anti-interference filter FP-3M
prevents information leakage in the power supply circuits, and also protects office equipment from external interference.
Filter FP-3M attenuates any signals in the range of 0.02 - 1800 MHz and, therefore, do not miss the informative signals arising from office equipment.
Specifications FP-3M:
Number of circuits 2
Rated current not more than 4 And
Rated voltage:
- at DC 500 V
- in alternating current with frequency 50 Hz 220 V
- when an AC current with a frequency of 400 Hz 115 V
Attenuation, dB
20-150 KHz 40
0.15 MHz - 1 GHz 100
The 1.0-1.8 GHz 80
The filter weight FP-3M 4.5 kg
The filter network noise OP-5
Network noise filter FP-5 is designed for the suppression of side electromagnetic radiation and interference (pre) for power supply, signaling, control, and organization of input of these circuits in shielded and shielded buildings, rooms, chambers, containers. OP-5 prevents information leakage in the power supply circuits, and also protects office equipment from external interference. The filter OP-5 attenuates any signals in the range 0.15 to 1000 MHz with an efficiency of 60 dB and, accordingly, does not transmit informative signals to the network arising from office equipment. Number of circuits - 2; nominal current is 10 A.
The filter network noise OP-11
Network noise filter FP-11 is designed for the suppression of side electromagnetic radiation and interference (pre) for power supply, signaling, control, and organization of input of these circuits in shielded and shielded buildings, rooms, chambers, containers. FP-11 prevents information leakage in the power supply circuits, and also protects office equipment from external interference. The filter OP-11 attenuates any signals in the range of 0.15 - 1000 MHz and 1.0 - 1.8 GHz with an efficiency of 80 dB and therefore, does not transmit informative signals to the network arising from office equipment. Number of circuits - 2; nominal current 16 A.
Suppression filter network FPS-70.
GENERAL INFORMATION
Suppression filter network FPS-70 is designed to suppress interference in the network wires with variable voltage 115 V, 400 Hz, 220V, 380V, 50 Hz and a constant - 400V with a maximum operating current up to 70A included in a shielded room and the screens earthed electrical devices. Filter FSP-70 is used to suppress electromagnetic interference in the power supply circuits of electronic equipment in the frequency range from 10 kHz to 1 GHz. Steveparadise filter FSP-70 prevent leakage of information signals on the power supply circuits. Noise filter FSP-70 refers to stationary equipment designed for continuous operation in ground-based and underground facilities.
SPECIFICATIONS
Operating voltage EMI filter FSP-70 AC frequency 50Hz - 220/ 380V
AC 400 Hz - 115V
DC - 400V
Working current: 70 A
Working attenuation at Zвх. = 50 Ohm, at least from 0.05 to 0.15 MHz - 20 dB;
from 0.01 to 0.05 MHz - 30 dB;
from 0.15 MHz to 30 MHz 80 dB;
from 30 to 1 000 MHz - 90 dB.
The number of filtered circuits/ phase 4/ 3
The range of operating temperatures from - 10 to + 40 ° C
Weight, not more than 25 kg.
Overall dimensions, mm 1010х210х155
Electromagnetic interference affecting the equipment mainly at high frequencies. This means that the correct operation of the system is achieved only when complied with the rules of wiring and production and technical requirements, and the requirements to high-frequency equipment (for example, shielding, grounding, filtering).
It is worth noting that measures to improve noise immunity is a complex of events. The use of only one of the filters does not solve the problem. However, it is the most effective way to remove quite a significant reduction of malicious interference with the normal electromagnetic compatibility of electronic equipment. We must not forget also that it fits a specific model to solve the problem – determined "on the spot" or by experiment and testing.
Filters new, storage. Prices retail and wholesale, check.
Filter the network anti-interference high frequency OP-7pcs 5.
The filter network noise OP-20pcs 11.
Anti-interference filter FSP-70 1pc.
Anti-interference filter FP-3M
prevents information leakage in the power supply circuits, and also protects office equipment from external interference.
Filter FP-3M attenuates any signals in the range of 0.02 - 1800 MHz and, therefore, do not miss the informative signals arising from office equipment.
Specifications FP-3M:
Number of circuits 2
Rated current not more than 4 And
Rated voltage:
- at DC 500 V
- in alternating current with frequency 50 Hz 220 V
- when an AC current with a frequency of 400 Hz 115 V
Attenuation, dB
20-150 KHz 40
0.15 MHz - 1 GHz 100
The 1.0-1.8 GHz 80
The filter weight FP-3M 4.5 kg
The filter network noise OP-5
Network noise filter FP-5 is designed for the suppression of side electromagnetic radiation and interference (pre) for power supply, signaling, control, and organization of input of these circuits in shielded and shielded buildings, rooms, chambers, containers. OP-5 prevents information leakage in the power supply circuits, and also protects office equipment from external interference. The filter OP-5 attenuates any signals in the range 0.15 to 1000 MHz with an efficiency of 60 dB and, accordingly, does not transmit informative signals to the network arising from office equipment. Number of circuits - 2; nominal current is 10 A.
The filter network noise OP-11
Network noise filter FP-11 is designed for the suppression of side electromagnetic radiation and interference (pre) for power supply, signaling, control, and organization of input of these circuits in shielded and shielded buildings, rooms, chambers, containers. FP-11 prevents information leakage in the power supply circuits, and also protects office equipment from external interference. The filter OP-11 attenuates any signals in the range of 0.15 - 1000 MHz and 1.0 - 1.8 GHz with an efficiency of 80 dB and therefore, does not transmit informative signals to the network arising from office equipment. Number of circuits - 2; nominal current 16 A.
Suppression filter network FPS-70.
GENERAL INFORMATION
Suppression filter network FPS-70 is designed to suppress interference in the network wires with variable voltage 115 V, 400 Hz, 220V, 380V, 50 Hz and a constant - 400V with a maximum operating current up to 70A included in a shielded room and the screens earthed electrical devices. Filter FSP-70 is used to suppress electromagnetic interference in the power supply circuits of electronic equipment in the frequency range from 10 kHz to 1 GHz. Steveparadise filter FSP-70 prevent leakage of information signals on the power supply circuits. Noise filter FSP-70 refers to stationary equipment designed for continuous operation in ground-based and underground facilities.
SPECIFICATIONS
Operating voltage EMI filter FSP-70 AC frequency 50Hz - 220/ 380V
AC 400 Hz - 115V
DC - 400V
Working current: 70 A
Working attenuation at Zвх. = 50 Ohm, at least from 0.05 to 0.15 MHz - 20 dB;
from 0.01 to 0.05 MHz - 30 dB;
from 0.15 MHz to 30 MHz 80 dB;
from 30 to 1 000 MHz - 90 dB.
The number of filtered circuits/ phase 4/ 3
The range of operating temperatures from - 10 to + 40 ° C
Weight, not more than 25 kg.
Overall dimensions, mm 1010х210х155
Electromagnetic interference affecting the equipment mainly at high frequencies. This means that the correct operation of the system is achieved only when complied with the rules of wiring and production and technical requirements, and the requirements to high-frequency equipment (for example, shielding, grounding, filtering).
It is worth noting that measures to improve noise immunity is a complex of events. The use of only one of the filters does not solve the problem. However, it is the most effective way to remove quite a significant reduction of malicious interference with the normal electromagnetic compatibility of electronic equipment. We must not forget also that it fits a specific model to solve the problem – determined "on the spot" or by experiment and testing.
Filters new, storage. Prices retail and wholesale, check.
