Z. h. spare parts for machine tools

Sell Zap. parts for lathe milling drilling machines:
Gear 1K62-02-121 (Gear unit-two 7th axis, z-36, m-2,25; z-24, m-2,25)
Shaft 1 axis 16K20
Shaft 3 axis 16K20
Shaft 3 axis 6М82.3.65, 6М83.3.33 To the milling Machine 6М82.3.65, 6М83.3.33 To
Shaft 655101 to the Machine 1П365 the lathe turret 1П365, the Shaft 11 axis 655101
Shaft 652140 to the Machine 1П365 the lathe turret 1П365
Gear 652079 to the machine 1П365 gear z=42 m=3
Gear 652084 to the machine 1П365 652084 gear 1 z-axis=30 m=3
Gear 655081 to the machine 1П365 the lathe turret 1П365
Gear 5-axis gearbox 1K62-02-116
Gear-clutch 1K62.07.89
Gear 6М82.4.65 N (6Р82.4.65) feed gearbox Gear unit three 2nd axis, z-18, z-36, z-27, m-2,5 feed boxes
Wheel gear 6М82.4.37
Wheel gear 6Р82.4.64 gear feed boxes
Gear turning center 1541 04-245А Z=17
The shaft of the 3rd axis 1K62.02.133
Gear feed gearbox 1K62.07.79
The body of the drum feed gearbox 1K62.07.17
Nut bimetallic z 30 6М82-7-101
Wheel gear 6Р82.3.48
Gear, the block on the milling machine 6н82, 6Н83, 6н12,6н13. Z-47, z 26. Module 4
Screw cross feed 1K62, 16K20
Gear feed gearbox lathe 1K62-07-84
The shaft in the apron 1М63.04.120, the shaft 19 axis (SSP 300) to the Worm gear 1М63.04.120, the shaft 19 axis (SSP 300). In the apron of the machine 1М63 (Dip300)
Gear 02-210 to the machine 1М63
Block gear 1М63.02.193 And Gear unit-two 5th axis, z-22, z-55, m-4
Gear 1 axis 1K62-07-100
Shaft 8 the axis of the drill 2М55 the lower part
Gear (gear unit) milling machine 6М82 Gear (gear unit) m=2,5 z=37/40/34 for milling machine 6М82-4-56Н, slots 6х28х34х8
The Cam gear Z=40 M=2,5 6М82-4-88

Gear Cam 6М82-7-164Б for milling machine Gear Cam 6М82-7-164Б for milling, for the mechanism of longitudinal displacement of the table

Wheel gear 6Р82.3.47
Wheel gear 6Р82.3.54
Gear 1K62-02-110 gear 3 axis
The wheel 1K62 Karbolit
Pulley 1K62.11.56 accelerated innings
Pulley 1K62.11.57 accelerated innings
Disk friction 2Н55 2М55
Spring balancer machine 2Н55 2М55. Width 50 mm, ф165 mm.