Set technician KLR-1

A set of laboratory KLR-1 ( Fig. 2.8) is designed to control the parameters of drilling mud on rigs with complex geological conditions, which provides a laboratory for solutions. The kit can be used in the laboratories of drilling fluids and drilling enterprises and production associations and scientific research organizations. [3]

Filter press FLR-1 included laboratory KLR 1, is designed to determine water loss of drilling fluids under a differential pressure 0 7 MPa through the filter surface with a diameter of 75 mm. [4]

To control the parameters of the first group is meant commercially available set of laboratory drilling fluids KLR-1, including beam balance GRP-1, the viscosimeter VBR-1, filter-press FLR-1, sump OM-2, the viscometer VSN-3, thermometer TBR-1 and a set of indicator paper, reagent and glassware for chemical analyses. In addition, at present, some enterprises for the control of drilling parameters using laboratory set firm Kem Iron ( USA), including beam balance, three-speed FANN viscometer, filter press FANN, Minister ( retort), sand content, chemical reagents and utensils for determination of cation exchange capacity, alkalinity mud alkalinity filtrate and total hardness. [5]

For full control of the mud properties designed set of laboratory KLR-1 - set of media service information system of drilling fluids. This kit is designed to validate the data obtained by the measurer or assistant driller kit BKR-1, n determination of other parameters of drilling mud ( percentage of sand, the thickness of a mud cake) and also some special parameters. [6]

To control the parameters of washing solution of the first and second groups used self-propelled control laboratory SKL, including the set of laboratory KLR-1, and other devices. [7]

Pneumatic devices VG-2 and PGY-1 to determine the content of free gas and the filtration rate of drilling fluids used, respectively, in stationary conditions and in the kit laboratory. In these devices the sample solution compresses the gas supplied under constant pressure from the cylinder to the reducer. [8]

In practice, the rate of filtration of f at normal temperatures determined using known instrument VM-6 and filter press FLR-1 ( Fig. 4.1), the supplied laboratory KLR-1. The technical characteristics of these pribora given below. [9]

The first group includes parameters that control which are mandatory for all exploration wells: density, viscosity, static shear stress after 1 and 10 min, filtration, the thickness of the filter cake, the concentration of solid impurities, the concentration of hydrogen ions. To control the parameters of the first group is meant commercially available kit laboratory KRL-1, including beam balance, the densimeter of GRP-1, the viscosimeter VBR-1, the device of the curves of PGR-1, a sump OM-2, filter press FLR-1 rotational viscometer BCH-3, stopwatch, thermometer, a set of indicator paper Rifai and indicator paper of pH, a set of reagents and glassware for chemical analyses. [10]

The first group includes settings that control which is mandatory for all wells: density, viscosity, static shear stress after 1 and 10 min, the filtration rate, the thickness of the filter cake, the concentration of hydrogen ions, the concentration of solid impurities. To control the parameters of the first group is meant commercially available set of laboratory drilling fluids KLR-1, which includes lever scales VLR-2, a viscosimeter VBR-1, filter-press FLR-1, sump OM-2, the viscometer VSN-3, thermometer TBR-1 and a set of indicator paper, reagent and glassware for chemical analyses. [11]