gear hobbing machine Y3150 (analogue 53А50)

Universal the machine in which the coordination of movements is carried out by kinematic circuits with summing mechanisms.

Machine enables as a counter and associated gear industry, and equipped with protection system in case of sudden power outage.

The machine table is driven in rotation with precision worm gear pair that provides a the higher the accuracy of the process running.

On stage computer modeling of basic components have been carefully analyzed using the finite element method, which allowed us to obtain hard, vibration-resistant and stable design.

The purpose of the machine and its application

This machine is suitable for large-scale, small scale and single production of cylindrical gears and worm gear.

Description of the machine

When machining cylindrical gear wheels, the machine can produce not only reciprocating cutting, but also the flow in the direction of the axis and radius.
When cutting spur gears of the same size, you need adjust the settings of the machine only once.

Machine easy to set up and operate, with automatic stop has a reliable safety device and automatic lubricating system.

Semi-automatic gear hobbing machine model Y3150E has a long service life.
A mechanical machine has good rigidity and a small thermal deformation, allows the operation of high speed under heavy load with high efficiency.

Mechanical the machine is easy to adjust, with automatic stop reliable protection device and automatic lubrication system.

Main technical features:

 

 

Y3150E

The maximum diameter the workpiece

mm

500

Maximum module

mm

8

Distance between the axes of the tool and the workpiece,

mm

30 ~ 330

Maximum vertical travel of tool

mm

300

Maximum table diameter/aperture

mm

520/80

The maximum diameter and the length of the bit

mm

160 *160

Maximum width the workpiece

mm

250

Minimal incision the workpiece

6

Maximum degree spindle speed (maximum angle of inclination of the tooth cut products)

grad

±45

The diameter of the milling bars

Ø

22, 27, 32

Spindle speeds / number stages of the innings

rpm

40-250 / 9

The distance between the working the table and the end surface of the tailstock

mm

400-600

The flow limit for guide axis

 

0,4-4 mm/revolution

The maximum angle rotation of the headstock

grad

±240

Maximum speed desktop

rpm

7,8

The maximum angle turning tool

grad

240

Cone size holes milling spindle

MT 5

Maximum longitudinal travel mills

mm

50

The capacity of the main engine

kW

4,0

Drive power fast movements

kW

1,1

Drive power table

kW

0,55

Drive power hydraulic pump

kW

1,1

The size of the machine

mm

2440 x 1370 x 1800

Weight

kg

4500