Zenitech 4/2500 QC12K hydraulic shears for metal, CNC guillotine zenitek KS
Offer type: salePublished: 05.09.2019
| Price: | 18 200 $ |
| Company: | Stanok.org - internet-magazin stankov |
| Seller: |  stanok.org stanok |
| Phones: |  +380981500024 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Zenitech QC12K 4/2500 (senetek кс12к 4/2500) hydraulic shears for metal, CNC guillotine
Price and availability check on the website the Machine org, or by phone
Specifications QC12K 4/2500 Zenitech:
Cutting length is 2500 mm
The cutting angle of 1-3 °
Cutting thickness is 0.35-4 mm
Reverse — 20-600 mm
Number of cuts — 10 times/min
Number of clips — 12
Main motor power — 5.5 kW
Dimensions(LxWxH) — mm 3040x1610x1620
Weight — 3800 kg
Functional features Zenitech QC12K 4/2500:
Programmable CNC system based on controller Estun 21 S allows to achieve high accuracy repeatability dimensions of products, reduces human error, increases productivity
Perfect cut without burrs
Sturdy welded monobloc frame design, withstand high overload
A reliable and durable machine
Desk with ball guide
Fixed cutting angle, allowing for easy cutting and to increase productivity with preservation of the accuracy characteristics at a high level
Hydraulic cylinders, presses the sheet along the entire length of the cut
Movement of the back stops – electrically, with accurate subsequent fine-tuning on the limb to 0.1 mm
The ability to work in a single, automatic and setup mode
The upper and lower blades made of high-strength, hardened steel, have two cutting edges and after the coup 180º to enable cutting knives without regrinding
Provided the mechanical adjustment of the clearance between the blades of the knives, depending on cutting thickness
Floor pedal provides convenience while working
Illumination of the cutting line
Synchronization of two hydraulic cylinders provides mechanical traverse between them
Drive move back stops Electromechanical programirovanii, remote controlled on the front panel
Powerful hydraulic cylinder and reliable hydraulic system allow flexible operation with high speed
The parallelism between the upper crosshead and working table adjustment is achieved via a mechanical clutch operated by a reversible motor
Hardened and well-polished tools of standard type or made on special order, give a wide range of types of products obtained
Electrical and electronics by Schneider Electric
Powerful reliable motor Siemens (Germany)
Package contents Zenitech QC12K 4/2500:
Main motor Siemens Germany
Electrical components Schneider France
Oil cylinder Yuhua mA'anshan, China
O-ring Nok Japan
Hydraulic valve BOSCH Rexroth, Germany
Pump Sunny USA
Controller E21 Nanjing, China
Knives Jinshan Shanghai, China
Fitting EMB Germany
Nonalphabetical Karcon South Korea
Ball screw Hiwin Taiwan
The controller in the floating the hand Is
Front and rear safety guard Is
Backgauge with ballscrew Have
The emergency button Is
A warranty period of 1 year applies to all machines,provide services for warranty and post-warranty service. Carry out commissioning (optional).
Zenitech QC12K 4/2500 designed to direct the longitudinal and transverse cutting of sheet and strip material of steel, non-ferrous metals and their alloys. The main purpose of the machine - a sheet material cutting in blank production. Zenitech QC12K 4/2500 designed to perform straight cuts, cut-outs so the machine does not run.
At the time of the cut, the pressure on the material being cut is not along the entire length of the cut, which reduces the required force. Also cutting steel sheet on this machine virtually eliminates metal loss in the form of chips.
To hold the material during cutting, Sanitec кс12к 4/2500 is composed of a nip press with hydraulic drive. The press device reduces the effect of drawing the material out from under the knife and cut the turns smoother. In addition, the presence of the clamp allows you to cut piles of material.
