Intermediate relay TeSys CAD32BL 3BUT 2NC, 24V DC
Offer type: salePublished: 16.09.2019
| Price: | 1 535 UAH |
| Seller: |  Shevchuk Oleg |
| Phones: |  +38093-210-96-70 Show phone |
| Address: | Ukraine, Kyiv |
Intermediate relay TeSys CAD32BL 3BUT+2NC, 24V DC with low current, screw clamp Schneider Electric - in stock 2pcs.
Main features:
range: TeSys
product name: TeSys CAD
the type of device or its accessories: control Relay
brief device name: CAD
contactor application: control Circuit
Additional features:
utilisation category: AC-15, DC-13, AC-14
configuration main contacts: 3 N.About. + 2 N.Z.
[Ue] rated operational voltage: = 690 V AC 25...400 Hz
type control circuit: the Post. the current low consumption
the voltage of the control circuit: 24 V post. current
[Up] rated impulse withstand voltage:
6 kV in accordance with IEC 60947
[Ith] conventional thermal current in open air: 10 A = 60 °C
Rated making capacity Irms:
140 And alternating current in accordance with IEC 60947-5-1
250 A DC in accordance with IEC 60947-5-1
[Icw] rated short-time withstand current:
100 But 1
120 A 500 MS
140 A 100 MS
the correct rating of fuse:
10 A gG according to IEC 60947-5-1
[Ui] rated insulation voltage:
690 V according to IEC 60947-5-1
600 certification UL
600 V CSA
mounting: Rack, panel Mounting
connections:
Screw terminal 1 cable (s) 1...4 mm2 - cable stiffness: flexible - without cable lug
Screw terminal 2 cable (s) 1...4 mm2 - cable stiffness: flexible - without cable lug
Screw terminal 1 cable (s) 1...4 mm2 - cable stiffness: flexible - with cable lug
Screw terminal 2 cable (s) 1...2.5 mm2 - cable stiffness: flexible - with cable lug
Screw terminal 1 cable (s) 1...4 mm2 - cable stiffness: rigid cable - without wire end ferrule
Screw terminal 2 cable (s) 1...4 mm2 - cable stiffness: rigid cable - without wire end ferrule
tightening torque:
1.2 N. m- on. screw terminal - with screwdriver Philips No 2
1.2 N. m- on. screw terminal - with screwdriver flat. Ø 6 mm
voltages control circuit:
0,1...0,25 Uc release
0,7...1,25 Uc is working
response time:
65...88 MS enable coil circuit N. About. contact
14...25 MS disable coil and opening of N.About. contact
57...77 MS disconnection of coil and opening of N.About. contact
28...42 MS disable coil and closing of N.Z. contact
mechanical life: 30 million cycles
operating frequency: 180 cycles/m
time constant: 40 MS
starting power, W: 2.4 W at 20 °C
power consumption during retention, W: 2.4 W at 20 °C
minimum switching voltage: 17 V
minimum switching current: 5 mA
time without overlapping:
1.5 MS after disabling the power supply (between NC and no contact)
1.5 MS when voltage is applied (between NC and no contact)
insulation resistance: 10 MOhm
mechanical durability:
Shocks control relay open 10 gn for 11 MS IEC 60068-2-27
Shocks control relay closed 15 g (nominal) for 11 MS IEC 60068-2-27
Vibrations control relay open 2 g (nom.), 5...300 Hz IEC 60068-2-6
Vibrations control relay closed 4 g (nom.), 5...300 Hz IEC 60068-2-6
Operating conditions:
standards:
VDE 0660, IEC 60947-5-1, NF C 63-140, BS 4794, EN 60947-5
product certification: UL, CSA
the IP degree of protection: IP2x in accordance with VDE 0106
protective performance: TH in accordance with IEC 60068
operating temperature ambient: -40...70 °C
ambient temperature storage: -60...80 °C
work height: 3000 meters without degradation over the temperature
Environmentally friendly suggestions:
Compliance with the environmental status: the Product category Green Premium
