Pressure switch Condor MDR 2/11, MDR 3/11

Pressure switch (Switch) for compressors Condor MDR2, MDR3.
Pressure switches or pressure switches are used to control piston compressors. They are used as a power device, by closing and opening the supply circuit of the electric motor indicator, depending on operating pressure supplied to the mechanical part of pressostat. Telepresent (switch condor) or pressure switch compressor serves to ensure that the compressor is operating in the automatic mode after start-up, pressure maintenance who-Ghost in the receiver. The device pressostat allows you to start and stop the compress-Sora as air flow to the consumer. Adjustment presostat Condor can be in the range of pressure ΔР = (0,20 ± 0,05) MPa. Switch principle of operation: pressure switch compressor can be used as a control device, when they co-cabins or unlock the control circuit, which, in turn, trigger devices run the motor. Pressure relay can be used as a pressostat washing machine. The pressostat Condor series MDR installed on all persnlich the compress-SORS Remez Aircst, Fiac, Remeza. The pressostat Condor MDR53/16 is applied to a screw compressor. The Condor pressure switches produces a German firm Condor Werke is the world-der. Buy switch You can, telling us the model of the compressor or power of moving the body of the compressor.
What you need to know to order a pressure switch (pressostat)
For ordering of the pressure switch Condor MDR 1, and Condor MDR2 MDR3 need, or at least highly desirable, to know the following:
- what pressure you want (it's just: MDR1; MDR2 or MDR3)
- at what pressure (working pressure in the pneumatic system: General pressure to arm. the manufacture of PET containers from 16 to 35 ATM.)
- do I need a button on/off (normally present)
- what connection compressed air (standard ¼ " or½")
Sometimes, this information can be found on the switch on the upper part of the lid, on the bottom, or even (in the case of overload relay) inside the body of the overload relays.