The oil cooler DM 1013.010
Offer type: salePublished: 27.02.2015
| Price: | 26 500 RUR |
| Company: | StanKomSvar |
| Seller: |  Petr Eliseev Nikolaevich |
| Phones: |  (495)782-70-61 Show phone (495)638-50-91 Show phone |
| Address: | Russian Federation, Moscow |
1.0 BSIA INFORMATION ABOUT THE OIL COOLER.
1.1 .Oil coolers of finned aluminum tubes are designed to provide a working temperature range of the oil in the compressors of the type PV-10/8 M1, GCP PV and their modifications.
As the cooled working fluid used mineral oils are not corrosive to aluminum and its alloys, a kinematic viscosity of from 10 to 400 mm2/s at temperatures up to 150°C.
As the cooling medium is applied to the air with the maximum permissible dust 10 mg/m3 not contain sticky and fibrous materials.
1.2. Position during the operation of the vertical.
2. OSNOVNYE TECHNICAL DATA AND CHARACTERISTICS.
2.1 .Main technical parameters of the cooler when running on mineral oil TP-22 TU 38.101543-75 with a temperature of 90°C and an ambient temperature of 20°C are given in table.1.
№ Name of the parameter Units. MEAs. Value
1 Shows the heating capacity of not less kW 54,0
2 Hydraulic resistance when the oil flow 75 l/min, not more than MPa 0,2
3 Aerodynamic resistance at a flow rate of air 18000 kg/h, not more than 0,15 kPa
4 oil Working pressure MPa 1,0
5 Volume m3 0,0054
6 Dry weight, not more than kg 25,0
H. the KIT.
In the delivery of the oil cooler includes:
1. The cooler - 1 piece
2. Passport - 1 piece
3. Instruction manual - 1 piece
