Filter separator MAN+HUMMEL 4930152101 for IFPW - 170x230x200

Separators for compressors GCP, PV The filter separator (sometimes referred to as separators, as well as Malouda-lielani, filter separators, filters, filters, thin separation), serve to separate the compressed air produced by the coil and Lopato-tion compressors, compressor oil. The usual term replacement for them, recommended target the majority of manufacturers of compressors, is 3000 hours. Structurally, the separators are submersible, installed under the flange of the oil reservoir, and an external connecting with threaded connections. Used filtering material may be wrapped flat around the reference frame of the separator in one (type 1) or two (type 2) layer, or may be pre-plasseraud (types 4 and 5). In addition, some cartridges can be supplied with an additional drainage layer (type 3). External filter separator (type 6) are pleated. In addition to counterparts, we can supply original and separators, with original brand-robkay and in the original packaging for multiple compressors manufacturers (strictly only these manufacturers!): Alup, Blitz, CompAir, Demag, Hydrovane, Mahle and, of course, for compressors firm BOGE Kompressoren that we supply ourselves. However, we want to emphasize that, unfortunately, the original separators, as well as other various filters and other consumables for compressors of all firms, except BOGE Kompressoren, we have never (in contrast to the process, which usually we have available), and their supplies have to wait; also, the original separators are typically much more expensive counterparts.