Relay control voltage VOLT-CONTROL VC-01

Voltage relay is designed to control the magnitude of the voltage 220-230V 50-60 Hz, auto-off single-phase load when the output voltage over the specified limits. In the process, VC-01, the microprocessor measures the current value of the network voltage, which is displayed on the display. If the voltage is beyond the user's upper or lower limits, then there is a quick disconnect load from the network and triggers the alarm. After normalization voltage, the load is automatically connected, set by the user. The device offers a mode of "Transit". VC-01 automatically controls the operation of built-in electromagnetic relays. This increases the degree of protection of electrical equipment from the effects of unstable voltage, provides economical power winding built-in relay low voltage, which increases the period of its total operation. Features VOLT-CONTROL VC-01 : - digital display - protective cover terminal block - sound the alarm - advanced mode "Transit" , - self-monitoring the health of the relay contacts , - economical power winding of the relay , - built-in protection (fuse) overvoltage higher than 400 V and short circuit current in the circuit , - performance - 0,02 . Model number VC-01-16 VC-01-32 VC-01-40 VC-01-40P* The current maximum, A 16 32 40 40 The nominal current, A 10 25 32 32 Nominal power, kW 2.2 5.5 7 7 Retail price, UAH. 240 320 *Model VC-01-40P is a current sensor that allows you to measure the current consumption and the power and display data on the display. In programming mode the user can: - select full mode or "transit"; to set the upper limit of operation of the relay in the range of 230 to 270; - set the lower limit relay in the range 100-210; to set the time reclosing relay in the range 3-999; - change the mode audible alarm. Mount the relay voltage is based on DIN rail 35 mm