The installation of the climate

The installation of the climate, is designed to provide and maintain parameters proofing environment inside the proofer or camera when proofing dough pieces baked goods before baking.

The installed capacity of the Heaters:

9; 13,5 kW

Volume proofing camera (one installation):

up to 20m3

The temperature range in proofing Cabinet (camera),

manually adjustable and automatically:

35-40°C

The range of relative humidity proofing Cabinet (the camera), is adjusted manually and automatically:

75-80%

The installation of the climate is a block Heaters (heaters), to which the lower part is mounted supply ducts and the top fan and the exhaust ducts. In block Heaters installed nozzle, which sprays water on the hot heating Elements. The resulting steam is mixed with air supplied by the fan, the resulting steam-air environment, air flow served in a proofer (camera). Spent air is taken from the proofer (camera) by the fan through the exhaust duct and again injected into the unit heating Elements, thus the vicious cycle installation. To update the air and monitor the status of the Heaters on block Heaters have a gate valve.

The installation is automated, set the required values the temperature and humidity of the corresponding devices, and then they also monitored the current readings. During operation, the controller maintains the specified parameters enabling and disabling the heating Elements and the injector. The protection system includes a device check circuit and the overheating sensor that disables the installation in case of exceeding the permissible the temperature of the Heaters (for example, when the fan has failed or incorrect operation the nozzle).