Ultrasonic heat meter PolluStat

Ultrasonic heatmeter PolluStat

Certificate of type approval
measuring technique №UA-M1/1p-1251-2006
The State Register №Have 1703-05
The calibration interval is 4 years

Application

Ultrasonic heat meter PolluStat E is designed to measure spent the amount of heat in otopitelnyh or refrigeration installations in which the heat liquid water. Strong performance (all-metal) flow meter parts with the measurement range 1:200, which is a guarantee of all the changes in consumption (and when the fluctuations of consumption). The image of the measured and recorded data occurs on the LCD display and split up to 4 levels:

• consumer level spent amount of heat tariff register and instantaneous flow rate
• archive level - 16 monthly quantities consumed the amount of heat, total, maximum monthly expenses and power
• service level - the maximum flow rate, power, temperature at the inlet and the outlet, the time interval for calculating the maximum power
• parametrizations level - set the following values directly on location: primary and secondary address M-BUS, customer number, interval time to calculate the maximum power

• Approval in accordance with EN 1434 class 2 (measuring range 1:200)
• No moving parts in the flow meter parts
• Installation in horizontal or vertical position
• Compact heat meter consists of a flow meter, heat meter and temperature sensors resistance
• The possibility of separating the heat from a flow meter parts
• The opportunity postoyannoi load consumption of 2 times the qp
• Temperature range flow meter parts from 5 to 150° allows application in 6/12°C Kladusa equipments with water as the heat environment
• No sensitivity to impurities 2 - or 4 - wire connection of resistance temperature sensors
• Two including space for additional equipment module M-BUS module and pulse output without damaging confidential mark
• Serial interface Mini-Bus
• Select the image contents
• Tariff function

Technical characteristics

Ultrasonic heatmeter PolluStat

Certificate of type approval
measuring technique №UA-M1/1p-1251-2006
The State Register №Have 1703-05
The calibration interval is 4 years

Application

Ultrasonic heat meter PolluStat E is designed to measure spent the amount of heat in otopitelnyh or refrigeration installations in which the heat liquid water. Strong performance (all-metal) flow meter parts with the measurement range 1:200, which is a guarantee of all the changes in consumption (and when the fluctuations of consumption). The image of the measured and recorded data occurs on the LCD display and split up to 4 levels:

• consumer level spent amount of heat tariff register and instantaneous flow rate
• archive level - 16 monthly quantities consumed the amount of heat, total, maximum monthly expenses and power
• service level - the maximum flow rate, power, temperature at the inlet and the outlet, the time interval for calculating the maximum power
• parametrizations level - set the following values directly on location: primary and secondary address M-BUS, customer number, interval time to calculate the maximum power