Barrel pumps LUTZ from polyvinylidene fluoride series PVDF for pumping concentrated acids and alkalis
| Company: | TOV 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +38 (96) 8897777 Show phone |
| Address: | Kyiv, Ukraine |
Barrel pumps made of polyvinylidene difluoride series designed for PVDF pumping highly aggressive environments, concentrated acids and alkalis from the standard containers (drums, pallet containers (IBC-containers) or non-standard containers with a height up to 2.5 m
The pump shaft is made of Nickel alloy - Hastelloy.
Based on the technological requirements, the impeller of the pump may be of 2 types: L - productive, R - pressure.
Two versions of the pump:
- DL - without sealing elements
- GLRD - with mechanical seal in heel pump, protecting the space between the shaft and the protective tube from getting pumped environment.
Equipment GLRD for drum pumps applies only in the case if the liquid is able to crystallize or to adhere to the shaft, thereby interfering with its free rotation.
Standard-length submersible parts drum pumps: 1000 mm for drums, 1200 mm for pallet containers.
On customer request for pumps PVDF can be made with the length of the submerged part of from 500 to 3000 mm
Equipped with pumps of various types of actuators: electric motors from 460 to 795 W and pneumatic 400W.
Motors for drum pumps can be equipped with regulators speed, protection from low-voltage disconnect. You can also to order stainless steel design of the engine, protecting their internal parts from damage in pairs acids.
PVDF-DL PVDF-GLRD The pump casing polyvinylidene fluoride polyvinylidene fluoride Impeller ETFE ETFE Seal no Viton® Mechanical seal no Graphite, SiC, Viton®, HC-4 Bearing ETFE/PTFE ETFE/PTFE Shaft Hastelloy HC-4 Hastelloy HC-4 Model drum pumps series PVDF: DL - without seal, GLRD - seal The drive for pumps cask series PVDF * defined on the water 20 gr.C ** determined with oil *** determined with 3M 3/4" hose and open the gun 3/4" The formula Concentration, % Density, kg/dm3 The ndimethylacetamide CH3CONH2 0,98 Alum KAl(SO4)2x12H2O 50 Ethylchloride C2H5Cl 0,92 Chlorate CH3CH2Cl 0,92 Chloroform CHCl3 100 1,48 Chromic acid H2CrO4 30 - 50 The cyclohexanol C6H11OH 0,94 Dichloracetic acid CF2Cl2 1,56 Formamid HCONH2 100 Hydrazin H2NNH2 Carbon tetrachloride CCl4 1,59 The cresol C7H8O 1,05 Sodium hypochlorite NaClO 10 - 20 Perchlorate sodium NaClO4 25 1,18 Nitrotoluene C7H7NO2 Hexachlorethane C2Cl4 Nitric acid HNO3 10 - 90 1,41 Hydrochloric acid 30 The sulfur chloride 10 1,69 Tetrachlorophenol 1,59 Trichloroethane 1,48 Perchloric acid 50 -90
