Barrel pumps LUTZ from Hastelloy series HC-DL for highly aggressive liquids
| Company: | TOV 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +38 (96) 8897777 Show phone |
| Address: | Kyiv, Ukraine |
Chemical pumps made of Hastelloy pumped almost any liquid, including flammable and explosive.
Barrel pumps from Hastelloy series HC are designed for pumping highly aggressive liquids, concentrated acids and alkalis low and the average concentration from the standard 200-liter drums and pallet containers (IBC-containers).
The pump shaft is made of Hastelloy (Nickel alloy).
For safe work with the most aggressive components in the conditions hazardous industries cask pumps HC series are completed explosion-proof electric motors.
Barrel pumps from Hastelloy are only supplied with impeller type R.
Constructively in this type of pump has no seals.
Standard-length submersible parts drum pumps: 1000 mm for drums, 1200 mm for pallet containers.
At the request of the customer for custom tanks, pumps HC can be made with the length of the submerged part of from 500 to 3000 mm
Motors for drum pumps can be equipped with regulators speed, protection from low-voltage disconnect. You can also to order stainless steel design of the engine, protecting their internal parts from damage in pairs acids.
HC-DL The pump casing HC-22 Impeller ETFE Seal Viton® (coated FEP) Mechanical seal no Bearing ETFE, graphite Shaft HC-4Model drum pumps series HC: DL - without seal The drive for pumps cask series HC * defined on the water 20 gr.C ** determined with oil *** determined with 3M 3/4" hose and open the gun 3/4"
