The pump container MP - NIRO and RE - NIRO cask for flammable liquids

Pump MP-Niro GLRD
Type impeller R
Explosion protection (Atex 100a) Yes
The diameter of the submerged part of the Max. mm 41
Liquid temperature max ° C 100
Material:
pump 1.4571
the impeller ETFE
The output fitting
the diameter of the fitting, 19-32 mm
EXT. thread G 1 1/4"
Immersion depth 1000 mm Art. No. 0151-240
Depth 1200 mm** Art. No. 0151-255

Specifications
Drives 4 MI and MI 4-E with frequency regulation
No. curve 900
Flow up to l/min 200
Head to M. C. Art. 10
Viscosity up to MPa. with 350
Density** up to kg/dm3 1,1
Weight (kg) motor + pump 6.0

Drive MA II 3
No. curve 950
Flow up to l/min 178
Head to M. C. Art. 9
Viscosity up to MPa. with 200
Density** up to kg/dm3 1,2
Weight (kg) motor + pump 9,0

Drive MA II 5
No. curve 951
Flow up to l/min 190
Head to M. C. Art. 10
Viscosity up to MPa. 550
Density** up to kg/dm3 1,3
Weight (kg) motor + pump 9.9
Drive MA II 7

No. curve 952
Flow up to l/min 210
Head to M. C. Art. 13
Viscosity up to MPa. with 400
The density up to kg/dm3 1,4
Weight (kg) motor + pump 11.1
Drive II 8 MA
No. curve 953
Flow up to l/min 243
Head to M. C. Art. 14.5
Viscosity up to MPa. with 650
Density* up to kg/dm3 1,4
Weight (kg) motor + pump 11.1
Drives MD-1, MD-2, MD-3
No. curve 954
Flow up to l/min 200
Head* up to m century Art. 12
Viscosity up to MPa. with 400
Density* up to kg/dm3 1,3
Weight (kg) motor + pump 4,7
Drive B4GT
No. curve 955
Supply* up to l/min 170
Viscosity up to MPa. with 400
Density**** up to kg/dm3 2.0
Weight (kg) motor + pump 14,2

*defined on the water With 20

**determined with oil

***special lengths pumps 200-2500 mm to order

****defined with 3 m hose 3/4" and open gun 3/4". Larger values are possible NPRI the short run.
Materials (in contact with the pumped medium):
MP-Niro-GLRD
Pump body: stainless steel. steel (1.4571)
Impeller: ETFE
Seal: Viton®
Mechanical seal: graphite, ceramics,PTFE, stainless steel. steel, Hastelloy HC-4
Bearing: graphite
Shaft: stainless steel. steel (1.4571)

Viton® - registered trademark of DuPont Dow Elastomers.

The pump RE-Niro GLRD
Type impeller L
Explosion protection (Atex 100a) Yes
The diameter of the submerged part of the Max. mm 100
Liquid temperature max ° C 100
Material:
pump 1.4571
the impeller ETFE
The output fitting
the diameter of the fitting, 19-32 mm
EXT. thread G 1 1/4"
Immersion depth 1000 mm Art. No. 0151-157
Depth 1200 mm Art. No. 0151-158
Specifications
Drives ME II 3
No. curve 750
Flow up to l/min 77
Head to M. C. Art. 14
Viscosity up to MPa. with 500
Density**** up to kg/dm3 1,6
Weight (kg) motor + pump 9,0

Drive ME II 5
No. curve 751
Flow up to l/min 77
Head to M. C. Art. 14
Viscosity up to MPa. with 900
The density up to kg/dm3 1,8
Weight (kg) motor + pump 9,9
Drive ME II
No. curve 752
Flow up to l/min 78
Head to M. C. Art. 17,5
Viscosity up to MPa. 700
Density* up to kg/dm3 1,9
Weight (kg) motor + pump 11,1
Drive ME II 8
No. curve 753
Flow up to l/min 78
Head* up to m century Art. 22
Viscosity up to MPa. with 950
Density* up to kg/dm3 1,9
Weight (kg) motor + pump 11,1
Drives MD-1, MD-2, MD-3
No. curve 754
Flow up to l/min 68
Head* up to m century Art. 13
Viscosity up to MPa. 700
Density* up to kg/dm3 1,8
Weight (kg) motor + pump 4,7
Drive B4GT
No. curve 755
Flow up to l/min 55
Head to M. C. Art. 8
Viscosity up to MPa. with 600
Density**** up to kg/dm3 2,2
Weight (kg) motor + pump 14,2

*defined on the water With 20

**determined with oil

***special lengths pumps 200-2500 mm to order

****defined with 3 m hose 3/4" and open gun 3/4". Larger values are possible in the short run.