Barrel pumps Lutz RE-PP and RE-Niro with full auto emptying
Company: | TOV 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
Seller: | Sergej Aleksandrovich |
Phones: | +38 (96) 8897777 Show phone |
Address: | Kyiv, Ukraine |
Barrel pumps with full auto emptying (RE) stainless steel and polypropylene. They are not only safe from the point of view of ecology, but also cost effective. First, they allow the use of the product almost to the last drop; secondly, by decreasing the costs for recycling residues, of which remains only the minimum amount at the bottom of the emptied containers.
Chemical resistance to match the pump with the function of mixing it is possible on the basis of the tables of the fluid pump PP and Niro.
When the engine is running the pump the suction hole pump closes the sealing lid inside. It drops and locks the heel of the pump, preventing outflow the trapped the fluid. Instant closing by a small lever under the hand wheel. Turning off the engine, you can extract liquid filled the pump and move it into the next barrel. This technical solution protected by patent.
Polypropylene pumps RE-PP are used for pumping acids and alkalis, and stainless steel pumps RE-Niro - aggressive, neutral, flammable and combustible liquids.
Pumps with complete emptying of the RE-Niro can be produced in food design. When picking the appropriate actuators is explosion-proof.
The length of the submerged parts of pumps are manufactured in the range from 500 to 2500 mm
RE-PP-GLRD RE-Niro-GLRD The pump casing PP Stainless steel 1.4571 Impeller PP ETFE The shutter PP ETFE / gr.steel 1.4571 Seal Viton® Coated FEP Mechanical seal Graphite, ceramics, PTFE, stainless steel.steel 1.4571, HC-4 Graphite, ceramics, PTFE, stainless steel.steel 1.4571, HC-4 Bearing Pure graphite Pure graphite Shaft Stainless steel 1.4571 Stainless steel 1.4571
Model drum pumps with complete emptying of the series of RE-Niro: DL - without seal, GLRD - seal The drive for pumps cask series RE-PP and RE-Niro * defined on the water 20 °C ** determined with oil *** determined with 3 m hose ¾ " and outdoor pistol¾"