TGS-3 pipe Bending machine profilegap TGS-3
| Company: | TOV 'Torgovo-promyishlennaya kompaniya 'Tehnoprom' |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +38 (96) 8897777 Show phone |
| Address: | Kyiv, Ukraine |
- Contact person: Alexander, Sergey Aleksandrovich
- Phone: +380 (96) 889-77-77
- +380 (66) 925-10-20
- +380 (67) 441-47-46, Fax
- +380 (44) 248-00-09, incremental 9900 Fax
- E-mail: tpktehnoprom@gmail.com
- Skype: tpktehnoprom
- Address: street Uritskogo, 45, Kyiv, 3035, Ukraine
TGS-3 pipe Bending machine profilegap TGS-3
The bending of the profile is carried out at a smooth rotation of the Central arm, altering the position of the middle roller.
Custom manufacture rollers for flexible area, channels, strips, and tubes of different size and profile
The maximum size of the bending profile:
round tube D=51mm, 2mm wall
square tube - 35mm, 2 mm wall
rectangular pipe "on the edge" - with the size 50x30, 2mm wall
rectangular pipe "on a plane" - 60x30, wall 2.5 mm
the area on the edge till the 45th any shelf thickness
the area on the edge of the 50th to the shelves thickness: 6mm
the area on the edge of the 56th only with shelf 4mm
corner to corner through 56 with any shelf thickness
the area on the corner of 60th to the shelves 5mm thick
the area on the corner of 63rd only with shelf 4mm
channel on the plane - to 65-th
the channel on the edge - no
range up to 34 mm
square up to 28mm
The maximum dimensions of bent profiles are given for materials with the yield strength not exceeding 2500 kg/cm2. If the profile is made from a material with higher strength characteristics, You you must contact our specialist for further vozmozhnosti use of this equipment.
Specifications
Engine
Voltage, V: 220
Power, kW: 1,5
Mains frequency, Hz: 50
Overall dimensions, mm: HH
Gross weight, kg: 260,00
Delivery in Ukraine.
