The flame sensor photoelectric FD-1.
Offer type: salePublished: 28.02.2015
| Price: | 90 UAH |
| Seller: |  Nikolaj tel. 097 147 68 78 |
| Phones: |  097 147 68 78 Show phone |
| Address: | Ukraine |
Description.
Flame detectors PD-1 are designed to operate as a sensing element in the protection circuits and alarm in case of fuel oil torch in furnaces low power boilers, furnaces, combustion chambers.
The sensitive element of the photosensor are: PD-1 - PD PD-263, which are mounted in special holders on the frame. The photocell is protected by glass, which is mounted in the housing by a spring ring.
To protect the photodetector from excessive heating, it is equipped with a radiator, and to prevent contamination of the glass provides a socket for the supply of air.
The sensors are mounted on a special tube that is installed in the setting of a boiler or burner device at a distance of 1,0...1,2 m from the nozzle.
If necessary, decrease the sensitivity of the photosensor it can be diafragmirovat washers of the required diameter.
The sensitive element of the photosensor are: PD-1 - PD PD-263, which are mounted in special holders on the frame. The photocell is protected by glass, which is mounted in the housing by a spring ring.
To protect the photodetector from excessive heating, it is equipped with a radiator, and to prevent contamination of the glass provides a socket for the supply of air.
The sensors are mounted on a special tube that is installed in the setting of a boiler or burner device at a distance of 1,0...1,2 m from the nozzle.
If necessary, decrease the sensitivity of the photosensor it can be diafragmirovat washers of the required diameter.
