Control electrode EC-00
| Company: | ChP 'AVITEH' |
| Seller: |  Sergej Dmitrievich |
| Phones: |  (067)473-12-22 Show phone |
| Address: | Ukraine, Cherkas'ka Oblast', Cherkasy |
The control electrode will incidentally in automation systems boiler. Its functioning is intended as a sensitive element in the protection circuits and alarm automation kits in case of a gas torch.
If we talk about the principle of the control electrode in the first place that it is based on detecting the properties of the flame. Let's look at this in more detail! So, if the flame is absent, the interval between the contact terminal electrode and the housing is open. And with the appearance of the flame surrounding the electrode, the interval between the contact terminal electrode and his body is like a closed using a diode.
In its structure the control electrode consists of a tube. Inside this pipe holder is insulated from the housing with ceramic sleeve. The holder is attached with two locking screws sensitive element, namely the rod molybdenum disilicide. This structure is convenient in use, which has been proved in practice.
The principles of operation of the control electrode there is a limit: the maximum possible temperature controlled gas flame should not exceed 1600°C. In the performance of the control electrode is General industrial.
Ratios of several species of the structural design of the control electrode dimensions in mm and weight in kg is as follows:
- EC-00 (CC mm; not more than 0.9 kg);
- EC-01 (CC mm; not more than 1.2 kg);
- EC-02 (CC mm; not more than 1.6 kg);
- CE-03 (CC mm; not more than 2.0 kg).
