Color printing machine gravure printing with computer control
Offer type: salePublished: 28.02.2015
| Company: | OOO Chzhetszyanskaya kompaniya po proizvodstvu mehanizmo |
| Seller: |  Steafan Feng |
| Phones: |  15605873867 Show phone |
| Address: | China |
Color printing machine gravure printing with a computer control DNAY800.1100C (layout 7 motors)
(1) Purpose: this machine is designed for composite films, paper, BOPP, CPP, PET, PC, PVC, and other similar property.The printing speed of this machine 120-150m/min, the mechanical speed of 160m/min
（2）Main gear: as the main transmission mechanism is applied to the motor control inverter, manufactured by Shenzhen company "Huachang", the purpose of using this mechanism is the transfer of each of the printed boards. Features: save electricity consumption.
（3）Weak mechanism for justification line: as justification line is used cylinder for pulling the core, when the horizontal adjustment to apply the rod for movement. Features: reduce the time for replacement, to ensure alignment and to improve product quality.
（4）the Knife-scraper for ink: Skrepka can be freely adjusted in height and angle, pressure scrapers used double cylinder, when the horizontal movement is the engine with the purpose of Cam rotation. Features: extend the life of the edition.
（5）the Lifting mechanism knock out: knock out a double cylinder to increase the pressure and solenoid valve for locking and orientation for the protection of the leak and stop the cylinder and the decline of the cylinder. Features: to ensure equalization of pressure and the difference in color.
（6）the Robotic system pre-painted and polychrome: this system can conduct longitudinal register before printing, then using the computer to edit synchronous motor, drive through the ball screw to adjust up and down, and automatically perform the polychrome directly. Features: save cost, rotate lubrication with high accuracy polychromy.
（7）the Mechanism for additive and fence: as of this mechanism is taken off the shelf for additive and fence, to automatically change the coils and automatically accept the materials for tension and traction control additive and fence materials used frequency-converting the vector to control the speed of the line. Features: acceleration stabilization polychromy, in the horizontal direction warning churning boards, saving materials, printing ink, solvent means and energy for large volumes of printing. When the feed speed is 150m/min, the waste materials is 5 meters, less than 3-motor on 15 meters, to save ink, a solvent vehicle, and an energy of about 25%, significantly reduce the cost of production.
（8）Drying, cooling device such as a drying system uses a closed furnace, designed in the form of a return air outdoor combined secondary source, the temperature is controlled by intelligent temperature controller. In the cooling device for each return roller is used water-cooling form to ensure cooling of the films. Features: save electricity consumption.
（9）For the printing roller knockout technique is centrally control man-machine interface. Man-machine interface is centrally managed by the opening and closing of the oven, and double cylinder synchronously controlled by them. The two ends of man-machine interface is applied to a large screen. For stationary image is applied indicator with LCD big screen.
