The detector differential pressure SPD-10/120

Switch differential pressure SPD-10/120 is for switching electrical circuits when the set value the differential pressure controlled environment.
The detector used in automation systems compressor systems and blast furnaces.

Distinctive features:
Due to new constructive solutions have been reduced weight and overall the dimensions of the detector. The device is reliable in operation, reliable in operation, easy to service.

Version:

Depending on the working environment of the detector is made in the following versions:

- SPD-10/120-In - the working environment - technical and water the condensate (chilled saturated steam);
- SPD-10/120-G - working medium: air or gas that does not contain corrosive agents and mineral oil with a viscosity of from 7 to 100 mm2/s in the operating temperature range.
The explosion protection:
The detector is made of explosion-proof, has explosion-proof level of protection "flameproof enclosure" and can be used in hazardous areas in buildings and outdoor installations.
Conditions operation:

The detector is designed for operation in the following conditions: ambient temperature from 1 to 60 º C for alarms, working on technical water, condensate and oil;

from minus 30 to plus 60 ° C for signalling devices running on gas (including those containing hydrogen sulfide);

relative humidity 100%, when 35 º C.

Specifications:

The number of switched circuits: 2.

Limits of adjustment of the pressure under which triggered detector: from 0.03 to 1 MPa.

Differential operation: up to 0.03 MPa.

The static pressure of the working environment: not more than 12 MPa.

The main parameters of electrical circuits, switched warning:

AC 50-60 Hz:

- rated operational voltage 24; 40; 220 V;
- rated operating currents of 1.6; 1,0; 0,6 A.

DC:

- rated operational voltage 24; 27; 110; 220;
- rated operating currents 0,60; 0,25; 0,16 A.

Dimensions: HH mm.

Weight: 6.8 kg