Graphite lubricants

Graphite C-0, C-1, C-2, Colloidal graphite dry drug

The drug colloidal graphite dry s-1 (PAG-1)

P-0, C-1, C-2.

With dry colloidal graphite products, used for cooking graphite compounds and lubricants. No./TU - 113-08-48-63-90

The ash content of not more than 1.0 %

Sediment stability % not less 60/1 time (hours):

Graphite stamps are used as components for the preparation of graphite mixtures and technological lubricants the manufacture of chemical and corrosion-resistant coatings, as additives plasticizer during tabletting, as components of adhesives for rubber fabrics for contacts and resistors for other purposes.

Fat content and plasticity of graphite are the most important properties that enable widely used in industry. The higher the fat content of graphite, the less the coefficient of friction. From the fattiness of graphite depends on the use of it as the lubricant, and the ability of adhesion to solid surfaces.
Due to these properties it is possible to create thin films by rubbing graphite surface of solids.

Anti-friction graphite:

1. Having low coefficient of friction.

2. Designed for parts operating under conditions of sliding friction.

3. Helps to reduce the friction between the parts of the mechanism.

These materials must have a minimum coefficient of friction, coating structure should to ensure intihuatana and the possibility of quick earnings to counterbody, the mechanical characteristics of the material must meet the operational loads must be quite durable and malleable.

The process antifriction coatings must ensure the implementation of the same requirements for wear-resistant coatings, with the only difference that it conduct not strictly limited to the thickness of the coating.

In connection with the fact that materials having the necessary anti-friction characteristics are not so a lot, to reduce friction use lubricants. Lubrication the most this type of materials, which are able to modify the coefficient of friction the rubbing surfaces.