Ferrosilicon FS-10 (FeSi-10)
Offer type: salePublished: 01.04.2015
| Price: | 3 000 UAH |
| Company: | OOO 'DK BONUSTREJD' |
| Seller: |  Fedorchenko Anatolij Borisovich |
| Phones: |  +380504500945 Show phone |
| Address: | Ukraine, Zaporiz'ka Oblast', Zaporizhia |
Due to the high cost of scrap and charge materials LLC "DK BALUSTRADE", to reduce the product cost, offers delivery to the address of Your venture silicon-containing charge material having the following chemical composition:
Fe 85,0-88,0
Ti 0,5-0,8
Si 10,0-12,0
Al 0,5-1,0
C 2,0
P 0.2
S 0,03
Cu 0,03
Cr 0,3-0,35
As a result of the tests, that when you replace in the charge FeSi 45 and 65 our charge material, the silicon content in liquid iron coincides with the design, casting defects not fixed. The high content of carbon and silicon in it is perfect for iron production. This allows to make a conclusion about the technical possibility and economic feasibility of application of this material.
The price of this material, containing 10% silicon and 90% iron, practically does not differ from the prices of scrap metal, this allows us to obtain substantial economic effect when using it.
Price: 2600 USD/ton including VAT.
Silicon-containing material obtained electrothermal method, intended for use as charge in steel production, it is not a Ferroalloy, in the "consumption" this material is not listed.
Also can be used for preliminary deoxidation of the metal in the furnace, because it has a large specific gravity, about 7 tons/m3. In addition, this material is used before the release of steel to maintain the carbon from oxidation (there is a possibility of adjustment of the metal on the carbon content).
Silicon-containing charge material used in the production of most grades of steel.
This fact really worth thinking about!!!
Fe 85,0-88,0
Ti 0,5-0,8
Si 10,0-12,0
Al 0,5-1,0
C 2,0
P 0.2
S 0,03
Cu 0,03
Cr 0,3-0,35
As a result of the tests, that when you replace in the charge FeSi 45 and 65 our charge material, the silicon content in liquid iron coincides with the design, casting defects not fixed. The high content of carbon and silicon in it is perfect for iron production. This allows to make a conclusion about the technical possibility and economic feasibility of application of this material.
The price of this material, containing 10% silicon and 90% iron, practically does not differ from the prices of scrap metal, this allows us to obtain substantial economic effect when using it.
Price: 2600 USD/ton including VAT.
Silicon-containing material obtained electrothermal method, intended for use as charge in steel production, it is not a Ferroalloy, in the "consumption" this material is not listed.
Also can be used for preliminary deoxidation of the metal in the furnace, because it has a large specific gravity, about 7 tons/m3. In addition, this material is used before the release of steel to maintain the carbon from oxidation (there is a possibility of adjustment of the metal on the carbon content).
Silicon-containing charge material used in the production of most grades of steel.
This fact really worth thinking about!!!
