Line for the production of 3D fences and barriers
Offer type: salePublished: 16.10.2013
| Seller: |  Rosstrojteh Rosstrojteh |
| Write a message | |
| Address: | Russian Federation |
In fact, the manufacturing process is reduced to the manufacture of welded mesh wire diameter and the formation of bends to make the item additional mechanical strength and rigidity. Fences are used for decorating various areas:
•sports facilities
•playgrounds
•fencing cottages, houses
•suburban areas
•Parking
•airports
Also fence fences are in great demand among construction companies. Fence sections typically have a width of 2.5 m and a height of 3 m
Specifications:
Welding порталWP-2500
The diameter of the welded rods, mm3-6
The size of the cells (step ), MOT 50x50 up to 200x200
Maximum mesh width, mm
The maximum number of spot welds, St
The flow cross proteasomes(bunker)
Submission longitudinal protoproto (with feed module)
Mode sarkidiornis*
Power welding transformers, kWth (75*)
Performance (transverse bars per minute)40-60
To give the fence the fence the additional strength of the welded section is placed in a hydraulic shaper ribs. We got ready for further painting section of the fence railings. Painting can be carried out using powder polymer cameras optional. Hydraulic shaper made in the form of separate devices (tables preparation not included).
Video:
http://www.youtube.com/watch?v=2YT47K_jkTw&list=UL
http://www.youtube.com/watch?v=cWjes2hYWiY&list=UL
More detailed information can be found on the website производителя(rosstroytech.ru).
•sports facilities
•playgrounds
•fencing cottages, houses
•suburban areas
•Parking
•airports
Also fence fences are in great demand among construction companies. Fence sections typically have a width of 2.5 m and a height of 3 m
Specifications:
Welding порталWP-2500
The diameter of the welded rods, mm3-6
The size of the cells (step ), MOT 50x50 up to 200x200
Maximum mesh width, mm
The maximum number of spot welds, St
The flow cross proteasomes(bunker)
Submission longitudinal protoproto (with feed module)
Mode sarkidiornis*
Power welding transformers, kWth (75*)
Performance (transverse bars per minute)40-60
To give the fence the fence the additional strength of the welded section is placed in a hydraulic shaper ribs. We got ready for further painting section of the fence railings. Painting can be carried out using powder polymer cameras optional. Hydraulic shaper made in the form of separate devices (tables preparation not included).
Video:
http://www.youtube.com/watch?v=2YT47K_jkTw&list=UL
http://www.youtube.com/watch?v=cWjes2hYWiY&list=UL
More detailed information can be found on the website производителя(rosstroytech.ru).
