Automatic multi-point welding machine meshes with bays WL
Offer type: salePublished: 16.10.2013
| Seller: |  Rosstrojteh Rosstrojteh |
| Write a message | |
| Address: | Russian Federation |
Automatic line for the production of welded mesh WL works with wire unwinding lengths of the longitudinal and transverse directions. The feed module transverse rods connected with the Bay. It is automatically cut to size and ready transverse rods are served from the drive in automatic mode in the weld zone. This line runs in a fully automatic mode.
The uniqueness of the line is that it is based welding portal with innovative systemicbrand nodes. In the welding site combines several pairs of electrodes that allow you to change the step mezhduvagonnye rods, without resorting to additional change of welding tyres, the process perestroikaites limited to changes in the program settings from the control panel and charging longitudinal provocativ need guides. This property line provides unprecedented advantage to subodhini - ability to rebuild several times a day! This model series WL is bundling created on request large SEBI.
Specifications welding portals WL
Welding portlander WL
The diameter of the welded rods, mm3-5
The size of the cells (prod. x cross.), MOT 50x50 up to 200x200
Mesh width, mm-3600
The maximum number of points of the welding units 20-72
The flow cross proteasomes (Bay)
Submission longitudinal proteasomes (Bay)
Mode sarkilarini with simultaneous clamping
Peak power, kVA
Power consumption, kW/C-40
Performance (transverse bars per minute)of 15, with a maximum width of the grid
More detailed information can be found on the website производителя(rosstroytech.ru).
The uniqueness of the line is that it is based welding portal with innovative systemicbrand nodes. In the welding site combines several pairs of electrodes that allow you to change the step mezhduvagonnye rods, without resorting to additional change of welding tyres, the process perestroikaites limited to changes in the program settings from the control panel and charging longitudinal provocativ need guides. This property line provides unprecedented advantage to subodhini - ability to rebuild several times a day! This model series WL is bundling created on request large SEBI.
Specifications welding portals WL
Welding portlander WL
The diameter of the welded rods, mm3-5
The size of the cells (prod. x cross.), MOT 50x50 up to 200x200
Mesh width, mm-3600
The maximum number of points of the welding units 20-72
The flow cross proteasomes (Bay)
Submission longitudinal proteasomes (Bay)
Mode sarkilarini with simultaneous clamping
Peak power, kVA
Power consumption, kW/C-40
Performance (transverse bars per minute)of 15, with a maximum width of the grid
More detailed information can be found on the website производителя(rosstroytech.ru).
