Stand high voltage to burn the insulation SVP

Stand high voltage to burn the defective cable insulation SVP is designed for: burn the defective cable insulation with subsequent ignition.

1.2. Conditions:

• the range of ambient temperatures, OS - from minus 20 to +40;
• relative humidity at a temperature of 25 to 80 %;
• atmospheric pressure, mm RT. senior - 650 - 800

1.3. Food SVP is made from industrial single-phase 220V, 50 Hz. Pets powered Autonomous generator of electricity with a capacity of not less than 4.0 kVA. For the full realization of the SVP power of the generator must be at least 25 kVA.

2.1. the GENERAL TECHNICAL DATA SVP

2.1.1. the Power supply - single-phase alternating current with frequency of 50 is 2 Hz, voltage 220 is 20V

2.1.2. Current consumption, no more, And 100

2.1.3. Parameters kilovoltmeter measuring high DC voltage:

• the limits of measurement at a constant voltage, kV - 30

2.1.9. Equipment weight, kg, not more than 100

2.1.10. Staff - 2 operator (not less than)

2.1.11. Service life, years 10

2.3. BLOCK THE BURN BPR-25/8

2.3.1. The maximum output voltage in idle mode, kV, 25

2.3.2. The minimum output voltage in idle mode, kV, 1

2.3.3. The number of stages of burning . 5

2.3.4. The maximum current of the unit burn in short circuit mode, And not less than 8

2.3.5. Maximum burning voltage in idle mode,, 500

2.3.6. Maximum afterburning current in short circuit mode, And not less than 16

2.3.7. Power consumption of the unit burning, kW , not more, 18

2.3.8. Power consumption, kW, not less than 8.5

2.3.9. The operation of the burn - long

2.3.10. Overall dimensions, mm, HH

2.3.11. Weight, kg, not more than 90