The thermostat universal "heating" and "cooling" on a DIN rail the MOUTH-16/D (16A/3kW)

Digital temperature controller on the DIN rail. Two logic: "heating", "cooling". Range -50°C ... +125°C. Step 0.1°C (in the range -9,9 ... +99,9°C). Relay output with changeover contact 16A/250V.

Digital universal thermostat MOUTH-16/D produces a temperature measurement and keeps the temperature of the working environment by managing connected heating or cooling units. There the ability to change the logic of operation (heating or cooling). The device it has 1 channel two-point control (on, off), there, upon reaching a user-specified upper-threshold regulation of NT-disables the load, when it drops to a specified bottom TNP - connects (when installing logic on heating), and, accordingly turns off the load when the temperature drops to consumer goods, includes, when rising to NT (when installing logic on cooling).

Technical characteristics of the thermostat:

• the limits of adjustment of temperature: -50 °C to + 125 °C;
• the ability to calibrate the temperature readings;
• step installation temperature: 0.1 °C;
• possible measurement accuracy: 0.5 °C (option sensor);
• temperature sensor: digital sensor DS18B20 (cable length ~ 2 m);
• maximum load: 16 A · 250 V;
• power supply voltage: ~220 V, 50 Hz;
• power consumption: less than 3W;
• ambient temperature: from +5 °C to + 50 °C;
• the size of the controller: HH mm.

The thermostat universal MOUTH-16/D is designed to control various processes, with a corresponding temperature range. The choice of logic allows this device to operate as heating and cooling devices.

The complete set of sensors with the length of the connecting cable 3M, 4m, and any other up to 20m.

The thermostat can be configured as a temperature sensor in a waterproof case.