Digital temperature controller for DIN rail mounting RT-40/D1 (40A/CWT)

The thermostat on DIN-rail RT-40/D1 has a removable sensor that you want place in an environment of temperature measurement. The controller produces measurement of temperature and keeps the temperature of the working environment by controlling the connected heating units (heating cable, infrared film, Heaters and any other appropriate power). The device has 1 channel on-off control (on, off), that is, when the preset user upper threshold regulation - disconnects the load when the reduction to a specified lower mounts. Led indicator allows you to monitor the current temperature measured environment.The controller on the DIN rail can be used in other systems climate control and in industrial processes where required maintaining the temperature within the specified limits, as well as allow design features of the device. Installation of the thermostat is on a standard DIN rail 35mm in control cabinets. Pets the capacity of the connecting sensor cable up to 20m without loss of precision the measurements. Possible standard sensors 3 m, 4 m

Technical characteristics of the thermostat:

• the limits of adjustment of temperature: from 0 °C to + 125 °C;
• installation step temperature: 1 °C;
• possible measurement accuracy: 0.5 °C;
• temperature sensor: DS18B20 digital (cable length ~ 2 m);
• maximum load: 40 · 240;
• power supply voltage: ~ 220 V, 50 Hz;
• power consumption: less than 3W;
• ambient temperature: from + 5 °C to + 50 °C;
• case size: HH mm (three seats on the DIN rail).

The thermostat can be configured as a temperature sensor in a waterproof case.