Press the crank CIE
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Crank press with pneumatos CIE, designed to perform various operations of cold punching sheet metal.
The bed of the Crank press with pneumatos CIE iron or steel, box-like shape. In bearings mounted eccentric shaft. The front frame on the guides set the slider, which is the working body of the press. The slider is connected with the eccentric shaft by means of an adjusting screw and detachable rod. On the work plane table fixed punch plate with T-slots and hole for "failure". To protect the press from overload as a safety washer that when the overload is destroyed.
Specifications:
The nominal press force, kN 400
The stroke of the slide, mm
the smallest 10
the greatest 80
The number of moves the slider in min-1 140
Table size
front-to-back 400
from left to right 600
The size of the holes in the table, mm
front-to-back 200
from left to right 300
diameter 250
The distance from the axis of the slide to the frame (departure), 220 mm
Maximum distance between table and slider in its lower position with the greatest progress, 280 mm
The distance in light between the posts of the bed, 280 mm
Overall dimensions, mm
front to back 1330
from left to right 1305
height 2600
Weight, kg 3940
The bed of the Crank press with pneumatos CIE iron or steel, box-like shape. In bearings mounted eccentric shaft. The front frame on the guides set the slider, which is the working body of the press. The slider is connected with the eccentric shaft by means of an adjusting screw and detachable rod. On the work plane table fixed punch plate with T-slots and hole for "failure". To protect the press from overload as a safety washer that when the overload is destroyed.
Specifications:
The nominal press force, kN 400
The stroke of the slide, mm
the smallest 10
the greatest 80
The number of moves the slider in min-1 140
Table size
front-to-back 400
from left to right 600
The size of the holes in the table, mm
front-to-back 200
from left to right 300
diameter 250
The distance from the axis of the slide to the frame (departure), 220 mm
Maximum distance between table and slider in its lower position with the greatest progress, 280 mm
The distance in light between the posts of the bed, 280 mm
Overall dimensions, mm
front to back 1330
from left to right 1305
height 2600
Weight, kg 3940
