Guillotine shears NA
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Shears are designed for straight cutting of sheet and strip material. Scissors are used in the procurement departments of the enterprises of mechanical engineering, shipbuilding and other industries.
The scissors you can cut non-metallic sheet materials, eliminating dull and cracking of the edges of the knives. Base team with a fixed table on which a fixed set of knives. Knife beam is moved along the lateral roller supports, and in front of two flat rails. Cut the sheet at the time of cutting is pressed to the table with hydraulic clamps. Management scissors button and pedal. Mode: up, single and continuous stroke.
The complex also includes a feed device model UP, truck sliding model T6.
Specifications:
The largest dimensions of the cut sheet, mm
thickness 32
width 3150
The greatest length of the cut strip on the plate 1000 mm
The frequency of moves of a knife (min-1)
auxiliary 30
when cutting the longest dimension of the cut sheet 3,5
The tilt angle of the rolling knife 2 gr.50min.
Allowable cutting force, kN 2251
The contact pressure of the sheet, kN 352
The moving speed of the rear stop, m/min 0-3,6
The air pressure in the network, MPa 0,45
Total power of electric motors, kW 50
The dimensions of the scissors without attached equipment, mm
from left to right 5185
from front to back 3700
height above floor level 2950
Shears weight without extra equipment (kg) 33950
The scissors you can cut non-metallic sheet materials, eliminating dull and cracking of the edges of the knives. Base team with a fixed table on which a fixed set of knives. Knife beam is moved along the lateral roller supports, and in front of two flat rails. Cut the sheet at the time of cutting is pressed to the table with hydraulic clamps. Management scissors button and pedal. Mode: up, single and continuous stroke.
The complex also includes a feed device model UP, truck sliding model T6.
Specifications:
The largest dimensions of the cut sheet, mm
thickness 32
width 3150
The greatest length of the cut strip on the plate 1000 mm
The frequency of moves of a knife (min-1)
auxiliary 30
when cutting the longest dimension of the cut sheet 3,5
The tilt angle of the rolling knife 2 gr.50min.
Allowable cutting force, kN 2251
The contact pressure of the sheet, kN 352
The moving speed of the rear stop, m/min 0-3,6
The air pressure in the network, MPa 0,45
Total power of electric motors, kW 50
The dimensions of the scissors without attached equipment, mm
from left to right 5185
from front to back 3700
height above floor level 2950
Shears weight without extra equipment (kg) 33950
