Universal milling machine TS
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Multi-purpose milling machine TS is designed to perform a variety of milling operations cylindrical, end, end, form and other cutters.
Milling machine TS apply to the processing of the horizontal and vertical planes, slots, frames, angles, gear wheels, spirals, patterns, dies, moulds and other parts of steel, cast iron, non-ferrous metals, their alloys and other materials.
Universal milling machine TS equipped with a trunk, running slip, and a swivel spindle head with individual gearbox and a separate drive that enables the machining tool mounted to the working surface of the table at any angle in any plane.
Separate horizontal spindle allows you to use this machine as a conventional horizontal milling.
Power drives and high stiffness machines allow you to apply cutters made of high speed steel and tool equipped with slices of hard and superhard synthetic materials.
Specifications:
Working surface of table, mm 400x1600
The number of grooves to clamp 5
Table load (kg) 1500
Longitudinal movement of table, mm 1120
Table rotation in both directions 45°
Transverse movement of the cross slide, 345 mm
The vertical movement of the console, 630 mm
Manual lateral movement of controvery, 500 mm
Torque on the spindle 1850 Nm
The cone tool ISO 50
The diameter of the front bearing 110 mm
The number of feeds 18
The denominator exponentially 1,25
Range of spindle speed, rpm 1400 28...
Longitudinal and cross feed, mm/min 16...800
Vertical feed, mm/min 5...250
The speed, length and breadth, mm/min 3150
Rapid travel vertically, mm/min 1000
The speed of the coolant, l/min 10
Main drive power, kW 11
Overall dimensions, mm
length 3500
width 3615
height 2720
Weight, kg 4920
Milling machine TS apply to the processing of the horizontal and vertical planes, slots, frames, angles, gear wheels, spirals, patterns, dies, moulds and other parts of steel, cast iron, non-ferrous metals, their alloys and other materials.
Universal milling machine TS equipped with a trunk, running slip, and a swivel spindle head with individual gearbox and a separate drive that enables the machining tool mounted to the working surface of the table at any angle in any plane.
Separate horizontal spindle allows you to use this machine as a conventional horizontal milling.
Power drives and high stiffness machines allow you to apply cutters made of high speed steel and tool equipped with slices of hard and superhard synthetic materials.
Specifications:
Working surface of table, mm 400x1600
The number of grooves to clamp 5
Table load (kg) 1500
Longitudinal movement of table, mm 1120
Table rotation in both directions 45°
Transverse movement of the cross slide, 345 mm
The vertical movement of the console, 630 mm
Manual lateral movement of controvery, 500 mm
Torque on the spindle 1850 Nm
The cone tool ISO 50
The diameter of the front bearing 110 mm
The number of feeds 18
The denominator exponentially 1,25
Range of spindle speed, rpm 1400 28...
Longitudinal and cross feed, mm/min 16...800
Vertical feed, mm/min 5...250
The speed, length and breadth, mm/min 3150
Rapid travel vertically, mm/min 1000
The speed of the coolant, l/min 10
Main drive power, kW 11
Overall dimensions, mm
length 3500
width 3615
height 2720
Weight, kg 4920
