Hydraulic press P
Offer type: salePublished: 17.10.2014
| Seller: |  Zajtsev Yurij Aleksandrovich |
| Phones: |  (48266)5-28-03 Show phone 903-803-83-16 Show phone |
| Address: | Russian Federation, Tverskaya Oblast' |
Hydraulic press is designed to perform a wide range of works: pressing-removing, firmware, calibration, editing, sheet metal forming without deep drawing.
Hydraulic press can be used for both production and repair units and workshops.
Custom presses can be equipped with the correct table and snap.
Specifications:
* Press power nominal, kN 630
* Stroke of the RAM, 500 mm
* The maximum distance between table and slider, mm 710
* Table size, mm
* from left to right 710
* front to back 560
* The speed of the slide, mm/s
* at idle 220
* when working stroke 10...32
* during the return 310
* Type of control system spool
* Drive power, kW 11
* Overall dimensions (without the right of the table), mm
* from left to right 1080
* front to back 1800
* height 2900
* Mass media, 3200 kg
Hydraulic press can be used for both production and repair units and workshops.
Custom presses can be equipped with the correct table and snap.
Specifications:
* Press power nominal, kN 630
* Stroke of the RAM, 500 mm
* The maximum distance between table and slider, mm 710
* Table size, mm
* from left to right 710
* front to back 560
* The speed of the slide, mm/s
* at idle 220
* when working stroke 10...32
* during the return 310
* Type of control system spool
* Drive power, kW 11
* Overall dimensions (without the right of the table), mm
* from left to right 1080
* front to back 1800
* height 2900
* Mass media, 3200 kg
