The divider stacker s-HD-

The divider stacker is structurally executed on the basis of the divider "Kuzbass 68-2M" with a vertical auger.

The divider stacker is designed to divide the dough from wheat flour 1st grade with moisture content of 47%, 2 varieties with moisture content of 48%, from rye flour with a moisture content up to 52% in pieces of equal mass and automatic placing the dough pieces in the form of cradles proofing-kiln units different types capacity 12 to 40 tons/day. The divider stacker unfolding performs dough piece in one direction, followed return to the starting position.

Specifications:

1. Weight of dough pieces: 0,15...0,80 kg.

2. Dividing head with the pistons 110 mm.

3. The performance is coordinated with the work proofer-oven unit and regulated

by setting frequency converters and controller the factory.

4. Division accuracy: 1,5 %.

5. The volume of the hopper 330 L.

6. Stroke up to 2070 mm.

7. The number of actuators - 3 PCs.

8. The installed capacity of drives, kW., not more - 6,75.

9. Weight, kg, not more - 400.

10. System control, through a programmed controller. Each actuator is equipped with a frequency Converter.

11. Fulfillment - kitting of imported and domestic, the nodes of the camera with the hopper and the auger for contact with the dough are made of steel.3, the cladding of steel.3 with a polymeric coating.

Possibly different the execution of the hopper (under testoboost or under dieoretical).

The virtues of our divider stacker:

1. vertical the location of the screw chamber significantly reduces its length, and therefore:

- after work less test the screw in the chamber;

- reduced mechanical the impact on the dough.

2. the presence of 3 frequency converters and controller allows you to adjust the divider stacker under any unit

3. the ease and the simplicity of design. Weight not over 300 kg.

4. two the gear motor simplifies the kinematic scheme and enhances the reliability design;

5. the bunker coated with a special fluoropolymer coating;

6. the presence of folding hopper for easy cleaning;

7. moving truck divider stacker is via a pair of screw-nut, more more reliable than the chain and sprockets;