Crusher (deport) RM-E electric

Chipper capacity up to 10 cubic meters/hour ( 6 tons/hour), designed to produce technological fuel or wood chips from waste wood (rack, bulk waste, tree trunks, logs, blocks, waste furniture, of a mixture of peat, sawn-off shotguns, etc.). Is installed permanently. Demand for paper and pulp mills, forestry, utilities and agriculture. Often such units are company specializing in landscape design and landscaping of streets. Received from pererobki mixture is widely used in the manufacture of pallets, compost, particle Board, etc.

Maximum log diameter 160mm, maximum width up to 240 mm, the weight of the whole setup reaches 900 kg. In the operation you can specify the parameters the fraction of chips at the outlet from 10 to 30 mm. the Fundamental mechanism of separase knife is a disc of steel with a diameter of 810 mm. On disk 2 fixed crushing blade of the Czech company Pilana, the housing is equipped with additional counter-knife. The operator places the waste in feeding-hopper, after which the hydraulic system redirects them to the workspace.

Hydraulic system

The hydraulic system is used when feeding wood into the work area

• The enclosure has two tightening rollers
• Each cushion has a separate hydraulic drive from the hydraulic motors
• The motors are driven by hydraulic pump.
• Hydroregulation the oil pressure in the system allows you to adjust the speed of the rolls, thereby adjusting the particle size of wood chips at the exit
• Hydrometerological allows you to change the direction of rotation of rollers
• The hydraulic circuit contains an oil filter and oil level indicator and temperature

Chipper RM-E is a stationary wood chipper disc type, driven by electric motor. Is installed stationary on a flat surface and needs no wall anchor. The machine drive is supplied from an electric motor via a belt drive.

You can buy the presented model from a reliable manufacturer at the lowest prices!