Heating of a private house with his own hands

The need to create its own system of heating occurs in any private house, cottage, bath. To start system with the generator heat boiler. Widespread have only three types of boilers: gas, solid fuel and electric. The third type of boiler has very limited use due to the high cost of generating heat. And the most widely gas-fired boilers. The main reason is work on the cheapest fuel of all possible options. However, the option of free fuel is also not excluded. Then in the home installs solid fuel boilers.

To reduce the financial cost of the heating system often make with their hands. This is especially true of the heat removal system: wiring of heating mains and radiators. Boilers are used ready. However, boilers are often made independently. So as to weld stainless steel at home is difficult, the boiler for a bath with his own hands made from ordinary steel. In this case it is necessary to strengthen the ceramic lining. Then the life of the boiler will be the same as boilers in stainless steel.

Chimneys to solid fuel boilers homemade bath used ready. They are expensive, so the complexities of their acquisition. Preferably, the first meter or two of the chimney to make stainless. Then the pipe will not burn through even after several years of operation. A similar solution can be applied in heating solid fuel boilers.

Wiring ducts in multi-level houses are available for the vents. Tolerance of horizontal sections. The main requirement that must be met — heat insulation of duct for installation in combustible structures.

All the parts for a homemade heating system can be purchased in DIY stores. All of these pipeline systems is unified. Using ready-made valves, you can get a heating system with reliability no worse than systems manufactured at the plant. The cost of such heating will be lower. Ready to be purchased only boiler, several radiators, connecting pipes and fittings.