Capacity of polypropylene to order from the company Plastprent
| Company: | Kompaniya "PlastPlent" |
| Seller: |  menedzher |
| Phones: |  8 (499) 403-17-13 Show phone 8 (930) 288-28-22 Show phone |
| Address: | Russian Federation, Moscow |
Polypropylene is one of the most suitable polymers for the manufacture of containers. It has a strength of about 200 kg/cm and is resistant to shock loads, but its main advantage is the complete inertia towards the water. This means that the capacity of polypropylene has no effect on the water and not corrosives itself. Especially the advantages of polypropylene is noticeable in the manufacture of containers of medium and large volume. These products are offered at this link http://plastplant.ru/polipropilenovye-emkosti/. It is the company's products PlastPlant.
PlastPlant the company has technological lines for manufacture of large products from polymers. It's all kinds of tanks, pontoon bridges, as well as growing popularity of convenient plastic pools. Such products are formed on special blanks, which define their inner form. On the form creates a protective separating layer, then set the reinforcement of fiberglass. The fiberglass reinforcement allows to significantly reduce the thickness of the walls of the container, to save material and to provide affordable price.
PlastPlant produces a capacitance in the range 100 – 10 000 litres tanks with a capacity of more than 1000 l, the optimal configuration is cylindrical with ribs. Depending on the configuration of the room the variant with installation on the end of the cylinder or to the side. Capacity is necessarily provided with a hatch allowing its inspection and cleaning from the inside.
The polypropylene can have any color RAL. As used through-dye polymer blend, the cost of the dye is essential. For the vast majority of products used the color blue. Also found in black and gray. The other colors are more applicable for small tanks. For pools the color is more important than the technical tanks. With enough budget you can choose any desired option.
Manufacture of tanks and pools in order
This option is best when you need to capacity, and the pool unusual configuration. The cost of the order will be the same as the purchase of a serial, plus a fee for making the mould.
