Infrared heaters Venice

Heaters Venice represent ceramic hob with built-in heating element that heats ceramics to 90 degrees (the safe temperature for ignition). In this design heater heating element does not react with oxygen, which helps to maintain the parameters of the normal habitat in a heated room. The stone warmed to a temperature of 90 degrees, it creates infrared radiation, turning into a powerful source of thermal energy.
Heaters Venice how much you consume of electric energy, the same, and give heat (99% Efficiency). Consumption of electric power significantly (with a peak temperature of 90 degrees до35% savings, 80 degrees-до60%, 70 degrees to 70%) is reduced during the automatic disabling of the heating element from the power source by the thermostat which controls the temperature of heating the ceramic surface from 0 to 90 degrees. This function, when selecting the capacity of the heaters, taking into account the calculation of the heat loss in the room, allows you to adjust the budget depending on the temperature "overboard". As well as to regulate the temperature of individual rooms.
Ceramic infrared panel thermostat - SCIT and panel ceramic convection – PAC equipped with reliable mechanical thermostat. Not equipped with a thermostatic control panel ceramic infrared - CRP and economical option APCI (see Equipment). Model PKI and EPCI more intended for the device of Autonomous electric space heating using thermostats to monitor the temperature of the air.
Recommend when installing the air regulators to pay special attention to the heat loss of the room and to choose the right capacity of the heaters. When the temperature "overboard" and under-capacity heaters the air is warmed to a predetermined temperature and thermostat not shut off the heating element, which entails the winding numbers on the electric meter.
On the back side heaters Venice, with the exception of models APCI equipped with profiled steel air intake, which is closed with a steel lid with fasteners for mounting the heater on the wall. This space is intended for air heating, the back side of the ceramic plate, creating natural convection. In bioconvection Venice – PAC into the air intake integrated additional heater panel from Expositor material. This design combines two types of heat, infrared and convection, while increasing the capacity two times without changing the size of the heater.
Infrared heaters Venice designed for mounting on the wall. But numerous requests were developed by the legs of the stand to install the heater anywhere. Installation of the heater does not require much effort. Drill some holes in the wall and plug in.
Infrared heaters are a new generation of artificial and natural stone Venice can be used as additional heating and individual electric heating. The equipment is not fastidious maintenance-designed for continuous operation 24 hours a day. Lifetime 25 - 30 years. Manufacturer's warranty 5 years.
Heated area in the description of goods, approximately are designed for heating of apartment buildings with minimal heat loss. For private houses the calculation is made separately taking into account the heat loss of the room.