Vacuum press GWP-2ВУДх2

Vacuum press GWP-2ВУДх2 model with vertical lift frame membrane and the heating of the carriage. Designed for wall PVC films simultaneously 3 planes billet of MDF in the vertical position. Vertical system built on the artificial production of Camozzi Italy with the system of protection and lubrication moving mechanisms.

Technical characteristics of vacuum press GWP-2ВУДх2

Technical features

GWP-2ВУДх2

Working cycle, min

less than 4

Setting temperature under the type of film

there

Manual adjusting the vacuum supply

there

Power of heaters, kW

30

Consumed power, kW/hour

less than 6

Power vacuum system, kW

1,5

Desktop dimensions table (for the frame), mi

3050х800

Net domestic size, mm

2900х700

Pressure pressing kg/cm sq

$ 0.99

Machine dimensions (L*W*h) mm

3400х1550х2100

Max. thickness mm

up to 80

Temperature range, deg. With

to 220

Brand vacuum pump

Busch R5 0063F

Speed vacuum pump, cubic meters/hour

63

Limit the residual pump pressure, mbar

0,012

Build time machine hour

0,5

Heating elements

KGT-lamp

Way to move carriage

vertical

Noise level, dB

68

Weight, kg

1000

Time manufacturing, calendar days

less than 20

1. Wide features:

• Finish PVC films of 0.1 mm up to 1 mm including vysokooplachivaema.

• Veneer PVC films simultaneously 3 planes billet of MDF, which is in vertical position.

• In depending on the dimensions of the parts can be simultaneously veneer multiple parts in different films.

• Maximum long parts up to 3500 mm.

• Maximum the part height 600 mm.

• Maximum width details 60 mm.

• Decorating of metal goods by heat-transfer (sublimation) of the figure with special transfer films, papers.

• Vacuum the press control system. Vacuum press is configured to semi-automatic the mode of operation, at the same time, the operator has the ability to completely to control the whole process of pressing. It is possible to change modes operation of the equipment.

• Adjustment heating power (option – not included in the basic package) – gives the ability to adjust the power of heating elements. There is also a the possibility of implementing soft start of heating. D