Conveyor cooling ACE 400T
Offer type: salePublished: 19.10.2016
| Price: | negotiated |
| Company: | Dito |
| Seller: |  Natal'ya |
| Phones: |  8495 64 695 64 Show phone |
| Address: | Russian Federation, Moscow |
• Conveyor klodawski designed to automate the cooling process (glazed pastry) in the food industry;
• The latest development of the company DITO group. Not a large size and a large refrigerating capacity gives you the opportunity to work at a higher speed and capacity up to 250 kg/hour klaidinga product.
• The conveyor is driven by a motor and gearbox for smooth changes in speed use a frequency Converter and control panel Omron panel allows you to adjust the speed of 0.1 unit.
• The volume of chilled air is controlled via remote control using a microprocessor (output temperature in the chamber, the operating status of the unit, the reasons for failure; setting the desired temperature in the chamber, defrost settings and other operating parameters of the compressor-condenser unit;
• The required temperature inside the chamber cooling is achieved by recirculation of cooled air;
• Chilled products are served conveyor belt on the table collect the finished product.
• Conveyor sectional cooling 2-3-4-conditioning with thermal camera is made of stainless steel ASI 304, the length of each section 2500 mm
• The conveyor is equipped with drive and tensioning station, a motor-reducer Motive Italy. Conveyor belt UNI Italy blue or white.
• Control panel with a frequency Converter Omron. START button , STOP button and speed control. Equipped with two digital controller EVK 203 Italy for refrigeration units with ventilated evaporators with defrost function. Temperature sensor PTC silicon.
Cooling unit EMBRACO ASPERA Italy
• The unit created in the Italian company ECO
• DUPONT freon R 404A
• The latest development of the company DITO group. Not a large size and a large refrigerating capacity gives you the opportunity to work at a higher speed and capacity up to 250 kg/hour klaidinga product.
• The conveyor is driven by a motor and gearbox for smooth changes in speed use a frequency Converter and control panel Omron panel allows you to adjust the speed of 0.1 unit.
• The volume of chilled air is controlled via remote control using a microprocessor (output temperature in the chamber, the operating status of the unit, the reasons for failure; setting the desired temperature in the chamber, defrost settings and other operating parameters of the compressor-condenser unit;
• The required temperature inside the chamber cooling is achieved by recirculation of cooled air;
• Chilled products are served conveyor belt on the table collect the finished product.
• Conveyor sectional cooling 2-3-4-conditioning with thermal camera is made of stainless steel ASI 304, the length of each section 2500 mm
• The conveyor is equipped with drive and tensioning station, a motor-reducer Motive Italy. Conveyor belt UNI Italy blue or white.
• Control panel with a frequency Converter Omron. START button , STOP button and speed control. Equipped with two digital controller EVK 203 Italy for refrigeration units with ventilated evaporators with defrost function. Temperature sensor PTC silicon.
Cooling unit EMBRACO ASPERA Italy
• The unit created in the Italian company ECO
• DUPONT freon R 404A
