Screw-cutting lathes; CU400M and CU500M (analogue 16K20, 1K62) produced by ZMM Bulgaria
| Company: | TOV 'F.Tehnolodzhi' |
| Seller: |  Fariga Dmitro Oleksandrovich |
| Phones: |  0503312897 Show phone |
| Address: | Ukraine, Kyiv |
Screw-cutting lathes CU400M and CU500M production of ZMM Bulgaria Holding is designed to perform turning the work - turning cones and cutting threads: metric, inch. Data machine tool models are analogues of the machine 16K20, ДИП200 and 1K62. Technical characteristics and rigidity of machine tools, a wide speed range of spindle rotation and feed is needed the capabilities of progressive instruments during the processing of various materials.
Electrician machine made by German the firm Schneider Electric. In spindle node, use bearings from SKF and FAG. Chucks – Bison (Poland).
All parts of machines are made of high-quality steel that ensures reliable operation of machines and save precision machining for many years.
It is possible to supply machines CU400M and CU500M in the performance of RD - continuously variable regulation of spindle speed. Turning machines with frequency Converter allow you to adjust the rotation speed the machine spindle is not mechanical, but electronically, which reduces the time changeovers to the next step and allows you to accurately choose the desired the spindle speed. Electronic speed control is a potentiometer located on the control panel of the machine, and the transmission speeds mechanically selects the range in which the speed control spindle screw-cutting lathe. This equipment also characterized by a greater maintainability and ease of maintenance mechanical parts screw-cutting lathe because of the gearbox eliminated most manual transmissions. Thanks to this performance machines can be higher to 35%.
Feature
CU400M
CU500M
Turning diameter over bed, mm
440
500
Machining diameter over cross slide, mm
240
300
Processing diameter on the spindle, mm
640
700
Center height, mm
220
250
Distance between centers, mm
1000, 1500, 2000, 3000, 4000, 5000.
Widths, mm
400
The front end on DIN55027
No. 8
Diameter of spindle hole, mm
72
Tapered hole of spindle
Metric 80
Number of spindle speeds
21
The speed range.min
20 – 2000
Main motor power, kW
7,5 (11)
The number of submissions
120
The range of longitudinal feed mm/Rev.
0.04 – 12
The range of transverse feeds, mm/Rev.
0,02 – 6
The number of threads
64
Mm step threading, mm
0.5 – 120
Step inch threading, Vit/1"
60 – ¼
Step modular thread Module
0.125 – 30
Step diametral threads, DP
240 – 1
Stroke of cross slide, mm
315
The stroke of upper slide, mm
130
The diameter of the quill, mm
90
The taper of the quill
No. 5
Quill travel, mm
230
Weight (RMC 1000 mm), kg
2900
2950
