Screw-cutting lathe C10T (analogue 1М63) produced by ZMM Bulgaria
| Company: | TOV 'F.Tehnolodzhi' |
| Seller: |  Fariga Dmitro Oleksandrovich |
| Phones: |  0503312897 Show phone |
| Address: | Ukraine, Kyiv |
Screw-cutting lathe C10T production ZMM Bulgaria Holding is designed to perform turning operations - turning cones and cutting threads: metric, inch. This model machine is most suitable for replacing the earlier very popular in Ryazan machine 1М63. Technical characteristics and rigidity of the machine, wide range frequency spindle rotation and feed allow you to take full advantage of advanced tools in the processing of various materials.
Electrician machine made by German the firm Schneider Electric. In spindle node, use bearings from SKF and FAG. Chucks – Bison (Poland).
All the parts of the machine are manufactured from high-quality steel that ensures reliable operation of machines and save precision machining for many years.
It is possible to supply the machine C10T in the performance of RD - continuously variable regulation of spindle speed. Turning machines with frequency Converter allow you to adjust the rotation speed the machine spindle is not mechanical, but electronically, which reduces the time changeovers to the next step and allows you to accurately choose the desired the spindle speed. Electronic speed control is a potentiometer located on the control panel of the machine, and the transmission speeds mechanically selects the range in which the speed control spindle screw-cutting lathe. This equipment also characterized by a greater maintainability and ease of maintenance mechanical parts screw-cutting lathe because of the gearbox eliminated most manual transmissions. Due to this, the performance of the machine can be higher to 35%.
The name of the parameter
unit.
the value
Center height
mm
330
Swing over the bed
mm
660
Swing over caliper
mm
420
The diameter of the formers
mm
850
Widths
mm
560
The distance between centers
mm
1500, 2000, 3000, 4000, 5000, 6000
Bar material
mm
100
Spindle
The front end of the DIN 55027
No.
11
The diameter of the hole in the spindle
mm
103
The inner cone spindle
metric.
120
Filing
The number of submissions
PCs
150
The range of longitudinal innings
mm/Rev.
0.039 — 18
The range of transverse innings
mm/Rev.
0.02 — 9
Tool holder
The size of the cutter
mm
40x40
Thread
The number of threads
PCs
75
Metric
mm
0.5 — 180
Inch
Tpi
0,16-60
Modular
M
0,125-45
Diametrically
wit/in
0,6-244
Caliper
Stroke of cross slide
mm
395
The stroke of upper slide
mm
150
Tailstock
The diameter of the quill
mm
105
The taper of the quill
KM
6
Quill travel
mm
225
Drive
Number of speeds main drive
PCs
15
The rpm range
rpm
9-1320
Engine power
kW
11, 15
Engine power high speed
kW
0,37
Power pump cooling
kW
0,18
Weight
For RMC 3000
kg
5200
