Sell, GUMP-300; UPG-48; CPF-56;

Sell installation check gyros UPG-48 / УПГ48; CPF-56/ УПГ56;
installation checking pressure gauges, GUN-300 / ГУМП300;
Hydraulic installation checking pressure gauges, GUPM-300
The installation UPG-48 for testing gyroscopic instruments
Installing the CPF-56 for testing gyroscopic instruments

Installing the CPF-56 is used for inspection and testing sensors of angular velocities and other gyroscopic instruments.
On the installation check the devices provided by:
1) rotation in the horizontal plane in both directions with 43-mja fixed angular velocities of 1.25 arc minutes per second up to 360 deg/sec
and any speeds in the range from ~ 0.012 to ~ 450 ° /s;
2) longitudinal and transverse rolls (in the bracket for mounting of devices);
3) rotation in vertical plane in both directions with velocities specified in claim 1.
- - - - - - -
The installation of HUPM-300 is designed to test in field and stationary conditions of all types of pressure gauges ( krov' oxygen )
working range pressure up to 300 kg/cm2.
1. To install are checked on the pressure gauge working pressure range up to 300 kgf/cm2 (except oxygen),
2. The unit operates in the temperature range from + 50 to minus 30°C.
3. The installation is checked by a pressure of 300 kgf/cm2. The system leakage should not exceed 3 minutes 2%
from the pressure setting.
4. Weight of the complete setting in the control pressure not exceeding 25 kg.
5. The size of the installation: 606x355x260.
6. Working fluid in the installation is clean filtered dehydrated oil (about 600 g)
one of the marks: velocit, MVP, AMG-10, MES, spiropiranovye mixture.