Belts and flat belts for sealing (capping) machines

These belts used for sealing (capping) machines in canning industry for the twisting of covers on the banks. The belts are coated, which was developed in conjunction with equipment manufacturers and end users, especially for packaging machines for tightening caps TWIST - OFF (Twist Off).

Coating belts do not leave marks on products and not deform it.

V-belts with wrapper

Often, firms that produce such belts, use black material. This leads to the fact that the lids and jars can stay the black bands. This greatly spoils the product. Therefore, for resolve this problem, use the straps to wrap light grey textile. Straps with such a coating does not leave residue on the surface.

In addition, a strap with a textile wrapper made spin at temperatures above +80°C. Maximum temperature the Curling caps is +110°C. Thanks a given temperature, chilled jar lid retracts by itself. It therefore, when the opening of the conservation we hear a certain sound from the jar.

The properties of the belt:

- resistance to temperatures from -30°C to +80°C

- suitable for use in tropical conditions

- resistance to dust

- the relative resistance to oils

for transfer the high loads

Flat belts with white rubber layer

 As you know, at all canneries used conveyor mechanisms through which products moving inside the shop. The lids on the jars and twists clothes a special machine, which delivers them to the conveyor. Banks passing under two belts that have a flat shape. They are located in parallel and moving in the opposite direction. Thanks to such design, the mechanism, which rotate the belts, presses them to the lids of cans. Thus, due to the movement of the belts in different directions is twist caps on banks. One the hours of operation of such a mechanism, it is possible clogging of about 50 thousand tons.

The advantages of strap:

 - Not stratified and do not have joints on coverage.

- Exceptional grip with excellent durability

 Fit for pulleys of minimum diameter.

- Seamless coating for uniform wear

- Do not lose flexibility for a very long time.

- Work smoothly and without vibration at high speeds.

- Resistance to high temperature and a few

Main the dimensions of the belts for the canneries:

38H998 (38,0х8,0х998 mm)

45H1145 (45,0х8,0х1145 mm)

42H1145 (42,0х8,0х1145 mm)

43H1120 (43,0х8,0х1120 mm)

45H1357 (45,0х8,0х1357 mm)

90H1145 (90,0х8,0х1145 mm)

95H1310 (95,0х8,0х1310 mm)

Also it is possible to produce belts under the order with any other required technical parameters.